17″ Inch AR15 Slim Hybrid Split Top M-LOK MLOK Skeletal Hex Black Free Float Handguard


Out of stock

Notify Me When Back In Stock


17″ Inch AR15 Ultra Light Slim Hybrid Split Top M-LOK MLOK MLOCK M-LOCK Skeletal Hex Anodized BLACK Free Float Handguard

Lighten your AR15 setup (only 1 lb 0.6 oz!!) and show off to your fellow shooters with this  Ultra Light M-Lock Skeletal Hex Anodized Black Free Float Hand Guard Grip Rail System. The black anodized 17 inch actual length is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a flat end. No end cap can be installed as there is no screw holes. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are fixed six slot picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with 2 x picatinny rails. Handguard is friction fitted (with cam/notch lock), on to the barrel nut and is held in place by 3 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)


  • One Piece Free Float High Quality 6061 T6 Aluminum Construction
  • Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
  • M-Lock CNC cuts allow for various installation preferences
  • Lightweight Steel Barrel Nut
  • Length: 17  inches top rail *
  • Outside Width: 1 5/8 Inches *
  • Outside Height (Including top rail): 2 inches *
  • Inside Diameter: 1 3/8 inches *
  • Ultra Light Weight (Including barrel nut, main screws): 1 lb 0.6 oz
  • Six Barrel Nut Screw Holes in 3/6/9 o’clock Position for Tight and Precise Fit


  • 1 x 17″ Inch AR15 Ultra Light Slim M-LOK Skeletal Hex Anodized Black Free Float Handguard
  • 1 x Steel Barrel Nut
  • 7 x Barrel Nut Screws (1 extra)
  • 1 x Barrel Nut Screw Allen Hex Wrench
  • 2 x Timing Shims
  • 2 x  5 Slot Picatinny Rails
  • 6 x M-Lok Rail Screws
  • 6 x M-Lok Rail Bolts
  • 1 x M-Lok Rail Screw Hex Tool

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.


Additional information

Weight 1.5 lbs