Sale!

15″ Inch .308 7.62 AR10 AR-10 Lightweight Bare Aluminum KEYMOD HIGH PROFILE Free Float Handguard

$79.95$89.95

SKU: FA-308-15-7075-HP-KEY-ALU Category: Tags: , , , , ,

Description

15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Bare Aluminum KEYMOD Free Float Hand Guard Fore Rail ForeGrip

Choose AR-10 (ARMALITE) and/or LR-308 (DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Bare Aluminum Tactical 15″ Inch Ultra Light KEYMOD Free Float HandGuard Fore Rail Grip system.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

The aluminum construction features added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches High Profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a Low Profile gas block! (Not included)

Features:

  • Matches High Profile uppers
  • One Piece Free Float High Quality Aluminum Construction
  • Flat top, Picatinny Rail
  • Keymod CNC cuts allow for various installation preferences
  • Aluminum Barrel Nut – AR-10 18TPI and/or LR-308 16TPI
  • Length: 15.0 inches
  • Outside Width: 2 1/32 Inches *
  • Outside Height (Including top rail): 2 7/32 inches *
  • Inside Diameter: 1 24/32 inches *
  • Weight (Including barrel nut, screws and shims): 10.5 oz
  • Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
  • Barrel Nut Sleeve helps lock hand guard into place

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Includes:

  • 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Bare Aluminum KEYMOD Free Float Handguard Grip
  • 2 x Timing Shims
  • 1 x Aluminum Barrel Nut – A R-10 and/or LR-308
  • 1 x Barrel Nut Sleeve
  • 1 x Barrel Nut Bolt
  • 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

 

Additional information

Weight 1.25 lbs
Barrel Nut Thread

16TPI LR308 DPMS, 18TPI AR10 ARMALITE, Both 16TPI AND 18TPI Barrel Nuts