16″ Inch AR15 Ultra Light Carbon Fiber Polymer Flat Black Keymod Free Float Handguard

$99.95

Out of stock

Notify Me When Back In Stock

Description

16″ Inch Ultra Light Carbon Fiber Polymer Matte Black KEYMOD Free Float Hand Guard Grip + 3 Rails

Lighten your AR15 setup (only 13.1 oz!!) and show off to your fellow hunters with this  Ultra Light Carbon Fiber Matte Black KEYMOD Free Float Hand Guard Grip. The non-anodized design features a flat matte, baked surface for added durability and camouflage. The 16 9/32 inch actual length is sure to amaze your friends! Made of a carbon fiber, nylon and glass fiber polymer to ensure low weight with high strength properties. Does not have that “spun”, striped or wind up texture common with other fiber brands. Free floating forerail design helps with accuracy while aggressive CNC cuts feature a light weight design. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with 3 x carbon fiber keymod rails. Handguard screws into the barrel nut and is held in place by a single hex screw and sleeve lock. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

  • One Piece Free Float High Quality CARBON FIBER / Polymer Construction
  • Flat top, Marked Picatinny Rail, extended for monolithic look
  • Keymod CNC cuts allow for various installation preferences
  • Lightweight aluminum 6061 T6 barrel Nut
  • Length: 16 9/32 inches (top rail length, includes barrel nut sleeve)*
  • Outside Width: 2 3/32 Inches *
  • Outside Height (Including top rail): 2 1/4 inches *
  • Inside Diameter: 1 25/32 inches
  • Ultra Light Weight (Including barrel nut, main screw): 13.1 oz
  • Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
  • Barrel Nut Sleeve helps lock hand guard into place
  • Picatinny rails are lightweight carbon fiber / polymer as well.

Includes:

  • 1 x 16″ Inch Ultra Light Carbon Fiber Matte Black KEYMOD Handguard
  • 1 x Barrel Nut
  • 1 x Barrel Nut Sleeve
  • 1 x Barrel Nut Screw
  • 1 x Barrel Nut Screw Allen Hex Wrench
  • 1 x 5 5/16 inch 13 Slot Polymer Keymod Rail*
  • 1 x 2 15/16 inch 7 Slot Polymer Keymod Rail*
  • 1 x 2 5/32 inch 5 Slot Polymer Keymod Rail*
  • 7 x Keymod Rail Screws
  • 7 x Keymod Rail Bolts
  • 1 x Keymod Rail Screw Hex Tool

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Note: No timing shims are included!!

Endcaps:

Additional information

Weight 1.5 lbs