Keep your AR in top shape by using this AR15 BCG Bolt Carrier Group Carbon Scraper Cleaner Tool. Scrape off and remove excess built up carbon fouling that comes from shooting hundreds of rounds. Many built in tools to help maintain several areas of the Bolt Carrier Group.

• • Bolt tail exterior scraper
  • Behind-cartridge extractor scraper
  • Firing pin small diameter scraper
  • Bolt tail shoulder scraper
  • Cotter pin puller
  • Bolt cam pin scraper
  • Bolt waist scraper
  • 1/4″ bit driver
  • Bolt carrier scraper (2)
  • Between bolt lugs scraper
  • Bolt tail interior scraper
  • Bolt face scraper

The post AR15 BCG Bolt Carrier Group Carbon Scraper Cleaner Remover Tool appeared first on Total War Tactical.

Tired of using duct tape rolls to install parts on your pistol slide or lower receiver? Make assembly / disassembly of your pistol easier with this universal bench block. This essential tool features roll pin channels and cut outs to capture loose parts. Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Simplifies the installation of pins, detents and springs.  Double sided makes it highly useful for correcting drifting and staking assembly pins, barrel link pin removal, dressing the ejector port, staking the front sight, dressing the slide rails, removing hammer and sear pins, main spring removal, drifting the rear sight and more. Molded from high-quality, durable polymer rubber to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Perfect for disassembling and reassembling handguns. Originally suited for 1911 style pistols, it can be used for various other pistols such as Glocks, Smith & Wessons, Springfields, etc.

Useful for the following tasks:

• Drifting and staking assembly pins
• Hammer and sear pin removal
• Mainspring removal
• Barrel link pin removal
• Drifting rear sight
• Staking the front sight, dressing the side rails
• Dressing the ejector port
• Great tool for disassembling & assembling handguns
• Rear sight drift channel, front sight staking channel and hammer and Sear pin removal holes
• Ejector port dressing and rail dressing round bottom channels

Includes:

• 1 x Pistol Bench Block

The post Universal Pistol Roll Pin Gunsmith Armorers Assembly Tool Bench Block appeared first on Total War Tactical.

Gunsmiths and armorers – Are you tired of your parts rolling off your cleaning mat into the dark abysses of your work space? Keep detente pins, springs, screws and other small parts from getting away from you with this 11″ by 17″ inch Rubber Cleaning Pad. It has raised edges and separate compartments so you can keep your assembly/disassembly area organized.  Durable rubber construction helps prevent marring of parts and is oil / solvent resistant. Additionally, it is flexible enough be rolled up to take into the field. Anti-slip backing helps keep it stationary on your table. Features 2 peg hook slots for easy storage in your work space.

The post 11×17 inch Rifle Pistol Parts Rubber Gun Cleaning Mat with Raised Edges appeared first on Total War Tactical.

Maintain your pistol barrel with care and precision with this 9 piece Pistol micro kit. It is a solid choice for a compact and portable pistol clean kit that can be used on the fly. Inside this kit, you’ll find a number of high-quality cleaning tools, including bronze /nylon / cotton brushes, 2 brass rods, and cleaning patches holder (patches not included). These tools are specifically designed for .38 .375 9mm pistols (and similar), enabling you to reach even the most challenging areas for a thorough clean. Includes a durable and compact carrying case that keeps all the components neatly organized, making it easy to take this cleaning kit with you to the range or on the go. Perfectly fits an a small mag / flash light pouch! The case itself doubles as the rod handle.

Features:

• Weight: 1.75 oz
• Diameter: 1.03 inches
• Length: 3.88 inches

Includes:

• 1 x Nylon Brush
• 1 x Bronze Brush
• 1 x Cotton Brush
• 1 x Patch Holder
• 1 x  3-5/16 inch Brass Rod
• 1 x 3-3/8 inch Brass Rod
• 1 x Carrying Case/Brush Handle

The post 9pc .38 .375 9mm Pistol Micro Mini Barrel Cleaning Maintenance Field Kit – Case, Brushes, Rods appeared first on Total War Tactical.

The SE GC14RP9 Firearm Repair Kit (14 pc) is a solid choice for a compact and portable gun repair kit that can be used on the fly. No matter if you are in a workshop or commercial setting, or just fixing or adjusting your firearm at home, this tool set will help you to get the job done. Assemble, disassemble, replace or adjust pins and parts, maintain, and assist in the cleaning of your firearm. Comes with a zippered case to keep all the tools stored.

Includes:

• 9 Steel Rolling Punches (1/16″, 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″)
• 3 Double-ended Brushes (Copper, Brass,  Nylon)
• 2 Double Ended Picks (nylon)
• 1 x Zippered Case

The post 14pc Gun Cleaning Maintenance Kit – Case, Nylon Picks, Brushes, Roll Pin Punches – GC14RP9 appeared first on Total War Tactical.

Assemble, disassemble, repair and upgrade your system with this all Steel Armorers Wrench Barrel Nut Muzzle Brake Multi Tool. Compatible with many 5.56 and .308 systems. Features a slot for attaching a torque wrench/tool/adapter as well.

The post AR10 AR15 AR Steel Armorers Wrench Barrel Castle Nut Muzzle Brake Multi Tool 223 5.56 .308 7.62 [V2] appeared first on Total War Tactical.

Accomplish your precision tasks easier with this 4-1 mini screwdriver set. Ideal for armorers, hobbyists, mechanics and technicians.

• INCLUDES 4 BLADES- two double-ended screwdriver blades: 1/16-inch and 1/8-inch wide slotted blades as well as #00 and #1 Phillips tips
• NO FEAR OF LOSING BLADES- unique double-ended carrier holds both blades simultaneously
• EASY TO USE- swap blade sizes with ease
• TAKE IT EVERYWHERE- capped ends and a pocket clip make this portable screwdriver The perfect traveling companion
• DURABLE- blades are made from chrome vanadium steel and the handle is rust resistant

The post General Tools 744 Armorers Pocket Pen 4-in-1 Precision Mini Flat Head Phillips Screwdriver Set appeared first on Total War Tactical.

Assemble, disassemble, repair and upgrade your system with this all Steel Armorers Wrench Barrel Castle Nut Muzzle Brake Multi Tool. Compatible with 5.56 and some .308 systems. Features a slot for attaching a torque wrench/tool/adapter as well.

The post AR15 AR10 AR Steel Armorers Wrench Barrel Castle Nut Muzzle Brake Multi Tool 223 5.56 .308 7.62 appeared first on Total War Tactical.

Improve your aim and avoid cant! Install your scope optics properly by using this 35mm Anti Cant Bubble Level Scope Ring Tool. Can be mounted on either side of a scope with the bubble level on top. Includes installation allen key wrench tool.

The post 35mm Anti Cant Bubble Level Scope Ring Device Tool for Red Dot Sight RDS Optic LPVO Scopes appeared first on Total War Tactical.