Lighten your AR Pistol setup (5.4 oz) with this 4.5″ Inch Free Float Handguard Rail System. Short length is great for your pistol or SBR setup. Free Float design helps with accuracy. This is a single piece, and a barrel cap can not be installed. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! The aluminum construction, anodized design features a bare unfinished surface. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 9mm setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Note: This product may contain some manufacturing/tool blemishes that are common to raw, unfinished surfaces! They are cosmetic in nature and can usually be buffed or bead blasted away. Or it may be covered up with the finish of your choice!

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Bare Unfinished
• Steel Barrel Nut
• Length: 4.5 inches (Rear to Forward Point of D-End)
• Top Rail Length: 4.25 Inches
• Outside Height (Including top rail): 2.03 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no attachments or rails): 5.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made in the U.S.A.

Includes:

• 1 x 4.5″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 4.5″ Inch AR15 AR9 Pistol Clamp MLOK Free Float Handguard Rail Grip D-End – BARE appeared first on Total War Tactical.

Lighten your AR Pistol setup (5.4 oz) with this 4.5″ Inch Free Float Handguard Rail System. Short length is great for your pistol or SBR setup. Free Float design helps with accuracy. This is a single piece, and a barrel cap can not be installed. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! The aluminum construction, anodized design features a flat matte surface for added durability and camouflage. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 9mm setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Anodized Black Finish
• Steel Barrel Nut
• Length: 4.5 inches (Rear to Forward Point of D-End)
• Top Rail Length: 4.25 Inches
• Outside Height (Including top rail): 2.03 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no attachments or rails): 5.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made in the U.S.A.

Includes:

• 1 x 4.5″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 4.5″ Inch AR15 AR9 Pistol Clamp MLOK Free Float Handguard Rail Grip D-End appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR SBR setup (about 11.0 oz!!) and show off to your fellow Zed hunters with this Zombie Green 13.5″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. You can also call it Lime or light Green, but will that matter to the rushing undead hordes that may be besieging your survival ranch? The aluminum construction features an anodized surface for added durability and smoothness. It is sure to amaze your fellow Walking Dead, ZERT and Apocalypse wishing team members! Free floating forerail design helps with accuracy (only head shots count!). This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 13.5 inches
• Inside Diameter: 1.37 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 12.7 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 13.5″ Inch Lightweight Slim ZOMBIE Green KEYMOD Free Float Hand Guard
• Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 13.5″ AR15 AR-15 Slim TOXIC ZOMBIE GREEN Keymod Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR SBR setup (only 8.1 oz!!) and show off to your fellow Zed hunters with this Zombie Toxic Green Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. You can also call it Lime or light Green, but will that matter to the rushing undead hordes that may be besieging your survival ranch? The aluminum construction features an anodized surface for added durability and smoothness. It is sure to amaze your fellow Walking Dead, ZERT and Apocalypse wishing team members! Free floating forerail design helps with accuracy (only head shots count!). This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 8.1 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 7″ Inch Lightweight Slim ZOMBIE Green KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR-15 Lightweight Slim ZOMBIE TOXIC GREEN Keymod Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (9.6 oz!!) and show off to your fellow elite shooters with this Anodized BLUE Colored 10″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 8.0 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 10″ Inch Lightweight Slim Blue KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 10″ Inch AR15 AR-15 AR Ultra Light Slim Anodized LE Police BLUE KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR SBR setup (only 9.6 oz!!) and show off to your fellow shooters with this Black anodized 10″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system.  The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy (only head shots count!). This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 9.6 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 10″ Inch Lightweight Slim Black KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 10″ Inch AR15 AR-15 Lightweight Slim Black Keymod Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR SBR setup (only 12.7 oz!!) and show off to your fellow Zed hunters with this Zombie Green 15″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. You can also call it Lime or light Green, but will that matter to the rushing undead hordes that may be besieging your survival ranch? The aluminum construction features an anodized surface for added durability and smoothness. It is sure to amaze your fellow Walking Dead, ZERT and Apocalypse wishing team members! Free floating forerail design helps with accuracy (only head shots count!). This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 12.7 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 15″ Inch Lightweight Slim ZOMBIE Green KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 15″ Inch AR15 AR-15 Lightweight Slim TOXIC ZOMBIE GREEN Keymod Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR SBR setup (only 9.6 oz!!) and show off to your fellow Zed hunters with this Zombie Green 10″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. You can also call it Lime or light Green, but will that matter to the rushing undead hordes that may be besieging your survival ranch? The aluminum construction features an anodized surface for added durability and smoothness. It is sure to amaze your fellow Walking Dead, ZERT and Apocalypse wishing team members! Free floating forerail design helps with accuracy (only head shots count!). This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 9.6 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 10″ Inch Lightweight Slim ZOMBIE Green KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 10″ Inch AR15 AR-15 Lightweight Slim TOXIC ZOMBIE GREEN Keymod Free Float Handguard appeared first on Total War Tactical.

Lighten your AR-15, AR15, SBR (Short Barrel Rifle), PDW setup (only 8.1 oz!!) and show off to your fellow hunters with this FDE Flat Dark Earth 7″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. Perhaps known to some older folks as ‘Olive Drab’, this non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 8.1 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 7″ Inch Lightweight Slim FDE Flat Dark Earth KEYMOD Free Float Hand Guard
• Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR-15 AR Ultra Light Slim Hunting FDE Flat Dark Earth KEYMOD Free Float Hand Guard Fore Rail Foregrip appeared first on Total War Tactical.

Lighten your AR-15, AR15, SBR (Short Barrel Rifle), PDW setup (only 8.1 oz!!) and show off to your buds with this Black anodized 7″ Inch Ultra Light Slim KEYMOD Free Float Hand Guard Fore Rail Grip system. Cool black anodized color is sure to amaze your friends! Free floating design helps with accuracy. This is a single piece, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Inside Width: 1.37 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 8.1 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 7″ Inch Lightweight Slim Black KEYMOD Free Float Hand Guard
• Timing Shims
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR-15 AR Ultra Light 8.1oz Slim BLACK KEYMOD Free Float Handguard Fore Rail Grip appeared first on Total War Tactical.