Lighten your precision .308 7.62 setup (15.9 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design with a front end which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. The handguard is fitted on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• 7 Slot Rear Picatinny Rail Top Section
• 6 Slot Front Picatinny Rail Top Section
• Top MLOK Slots: 8
• Side/Bottom MLOK Slots: 10
• Inside Width: 1.60 inches
• Outside Height (Including top rail): 2.11 inches
• Wall Thickness: 0.06 inches
• Weight (Including barrel nut, shims and screws only): 15.9 oz
• 6 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 6 x Barrel Nut Screws
• 1 x Barrel Nut
• 1 x Shim
  1 x Hex Tool

The post 19″ AR10 LOW Profile HYBRID MLOK M-LOK Free Float DPMS Handguard Partial Top Rail appeared first on Total War Tactical.

Update your precision fighting AR with this  light weight (14.8 oz ) handguard system. Free Float design helps with accuracy. Full length rail is a single piece design which can not accommodate an end cap.  Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9/12 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!  Hard Coat Anodized Black finish.  The handguard is friction fitted, clamped on to a  steel barrel nut, which is held in place by hex screws. The screws have individual nuts so there is no stripping the threads! The off-set screw threads help prevent loosening of the nuts. Fits on any 556 223 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits AR15 uppers
• One Piece Free Float High Quality Construction
• 6061-T6 Aluminum Material
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Anodized Matte Black Finish
• Longest Length: 19.5  inches
• Outside Width: 1.90 inches
• Inside Width: 1.36 inches
• Outside Height (MLOK Areas): 1.82 inches
• Outside Height (Rail Areas): 1.95 inches
• Wall Thickness: 0.08 inches
• Weight (Including barrel and screws only): 14.8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit
• 2 Off-Set nuts to help prevent loosening

Includes:

• 1 x 19.5″ AR15 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 19.5″ AR15 Clamp HYBRID Top Cut Rail MLOK M-LOK Free Float Handguard appeared first on Total War Tactical.

Update your precision fighting AR with this  light weight (9.8 oz ) handguard system. Heavy Duty and Free Float design helps with accuracy. Full length rail is a single piece design which can not accommodate an end cap.  Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Integrated micro handstop located at the muzzle end. Hard Coat Anodized Black finish.  The handguard is friction fitted, clamped on to a  steel barrel nut, which is held in place by hex screws.  The screws have individual nuts so there is no stripping the threads! Also features anti rotation tabs! Fits on any 556 223 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits AR15 uppers
• One Piece Free Float High Quality Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Integrated Front Mini Handstop
• Steel Barrel Nut
• Anti-Rotation Tabs
• Anodized Black Finish
• Longest Length: 15.0  inches
• Outside Width (MLOK Areas) : 1.50 inches
• Outside Width (Rail Areas) : 2.10 inches
• Inside Width: 1.33 inches
• Outside Height (MLOK Areas): 1.83 inches
• Outside Height (Rail Areas): 1.93 inches
• Wall Thickness: 0.08 inches
• Weight (Including barrel and screws only): 9.8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 15″ A15 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 15″ AR15 Clamp HYBRID Top Cut Rail MLOK M-LOK Free Float Handguard with Integrated Mini Hand Stop appeared first on Total War Tactical.

Lighten your AR15 setup  and show off to your fellow shooters with this ultralight system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 7.25 inches top,  ~6.5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 7.75 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 7″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 7″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 7.25 inches top,  ~6.5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 7.75 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 7″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 7″ AR AR15 Slim Clamp Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup (about 1 lbs 7/8 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design slanted front which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. QD quick disconnect mount holes at the front and rear, on both sides. However the rear holes require a short QD push button sling mount, as the barrel nut may prevent full seating. The handguard is friction fitted, clamped on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. The screws have individual nuts so there is no stripping the threads! Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• 4 QD Quick Disconnect Push Button Sling Mount Points
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• Picatinny Rail Area Width: 2.29 inches
• MLOK Slot Area Width: 1.71 inches
• Inside Width: 1.53 inches
• Outside Height (Including top rail): 2.40 inches
• Wall Thickness: 0.9 inches
• Weight (Including barrel and screws only): about 1 lbs 1/8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 19″ AR10 LOW Profile Slanted HYBRID MLOK M-LOK Free Float DPMS Handguard WITHOUT Top Rail appeared first on Total War Tactical.

Update your precision fighting AR with this  light weight (13.2 oz ) handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design crown front which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Hard Coat Anodized Black finish. QD quick disconnect mount holes at the front and rear, on both sides. However the rear holes require a short QD push button sling mount, as the barrel nut may prevent full seating. The handguard is friction fitted, clamped on to a  steel barrel nut, which is held in place by hex screws. Also features anti rotation tabs! The screws have individual nuts so there is no stripping the threads! Fits on any 556 223 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits AR15 uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• 4 QD Quick Disconnect Push Button Sling Mount Points
• Steel Barrel Nut
• Anti-Rotation Tabs
• Anodized Black Finish
• Longest Length: 15.0  inches
• Outside Width (MLOK Areas) : 1.52 inches
• Outside Width (Rail Areas) : 2.10 inches
• Inside Width: 1.35 inches
• Outside Height (MLOK Areas): 1.86 inches
• Outside Height (Rail Areas): 2.28 inches
• Wall Thickness: 0.08 inches
• Weight (Including barrel and screws only): 13.2 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 15″ A15 Handguard
• 3 x Barrel Nut Screws/nuts (1 x spare extra)
• 2 x shims
• 1 x Barrel Nut

The post 15″ AR15 Clamp Style HYBRID MLOK M-LOK Crown End Free Float Handguard WITHOUT Top Rail appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup (about 1 lbs 0.75 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design crown front which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. QD quick disconnect mount holes at the front and rear, on both sides. However the rear holes require a short QD push button sling mount, as the barrel nut may prevent full seating. The handguard is friction fitted, clamped on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. The screws have individual nuts so there is no stripping the threads! Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• 4 QD Quick Disconnect Push Button Sling Mount Points
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• Outside Widest Width: 2.13 inches
• Inside Widest Width (MLOK Slots area) : 1.69 inches
• Inside Width: 1.52 inches
• Outside Height (Including top rail): 2.39 inches
• Wall Thickness: 0.9 inches
• Weight (Including barrel and screws only): about 1 lbs 0.75 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 4 x Barrel Nut Screws/nuts (1 x spare extra)
• 1 x Barrel Nut

The post 19″ AR10 LOW PROFILE Crown End HYBRID MLOK M-LOK Free Float DPMS Handguard WITHOUT Top Rail appeared first on Total War Tactical.

Lighten your AR15 setup (only 10.75 oz!!) and show off to your fellow shooters with this ultralight system.  Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels! 

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Un-anodized bare aluminum finish
• Length: 13.5 inches top rail
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 10.75  oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy installation onto barrel nut

Includes:

• 1 x 13.5″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 13.5″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard – Bare Aluminum appeared first on Total War Tactical.

Lighten your AR15 setup (only 1 lb 0.6 oz!!) and show off to your fellow shooters with this ultralight system.  Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels! 

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Un-anodized bare aluminum finish
• Length: 15 inches top,  ~14 5/32 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 11 3/8 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy installation onto barrel nut

Includes:

• 1 x 15″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 15″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard – Bare Aluminum appeared first on Total War Tactical.