Tired of using duct tape rolls to install parts on your pistol slide or lower receiver? Make assembly / disassembly of your pistol easier with this universal bench block. This essential tool features roll pin channels and cut outs to capture loose parts. Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Simplifies the installation of pins, detents and springs.  Double sided makes it highly useful for correcting drifting and staking assembly pins, barrel link pin removal, dressing the ejector port, staking the front sight, dressing the slide rails, removing hammer and sear pins, main spring removal, drifting the rear sight and more. Molded from high-quality, durable polymer rubber to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Perfect for disassembling and reassembling handguns. Originally suited for 1911 style pistols, it can be used for various other pistols such as Glocks, Smith & Wessons, Springfields, etc.

Useful for the following tasks:

• Drifting and staking assembly pins
• Hammer and sear pin removal
• Mainspring removal
• Barrel link pin removal
• Drifting rear sight
• Staking the front sight, dressing the side rails
• Dressing the ejector port
• Great tool for disassembling & assembling handguns
• Rear sight drift channel, front sight staking channel and hammer and Sear pin removal holes
• Ejector port dressing and rail dressing round bottom channels

Includes:

• 1 x Pistol Bench Block

The post Universal Pistol Roll Pin Gunsmith Armorers Assembly Tool Bench Block appeared first on Total War Tactical.

Improve your aim and follow up shots with this Glock Recoil Rod in stainless steel. Reliability, recoil management and performance will improve by replacing the standard plastic factory rod with this hi quality steel unit. The closed end of the rod has a hex cut out to make installation quicker and easier.

Features

• High quality steel
• Polished stainless finish
• Includes screw, washer and 2 Allen wrenches
• Fits: Glock models G17 , G22, G24 G31, G34, G35, G37

The post Glock G17/22/24/31/34/35/37 Pistol Recoil Guide Rod – Stainless Steel appeared first on Total War Tactical.

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – B Model – Cerakote Black – USA MADE

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and 6 side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. Unique cerakote black color is one of the newest and hottest trends today. This unique tactical color is sure to amaze your fellow shooters. Please note: This is not an anodized item. This design is heavy duty and designed to compete in the most extreme conditions. 

• Custom Cerakote Coating Interior & Exterior
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & 6 Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut compatible with some Holosun, Riton, SwampFox, Vector Optics and NCStar Red Dot Sights
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 6/32 x 1/4 inch threads for RMR
• Proudly Made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – B Model – Cerakote Black – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Black – USA MADE

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. Unique cerakote black color is one of the newest and hottest trends today. This unique tactical color is sure to amaze your fellow shooters. Please note: This is not an anodized item. This design is heavy duty and designed to compete in the most extreme conditions. 

• Custom Cerakote Black Coating Interior & Exterior
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut 
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 4-40×1/4 For your RMR
• Proudly Made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Black – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Grey – USA MADE

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. Unique cerakote Grey color is one of the newest and hottest trends today. This unique tactical color is sure to amaze your fellow shooters. Please note: This is not an anodized item. This design is heavy duty and designed to compete in the most extreme conditions. 

• Custom Cerakote Gray Coating Interior & Exterior
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut 
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 4-40×1/4 For your RMR
• Proudly made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Grey – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote FDE Flat Dark Earth – USA MADE

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. Tactical FDE Flat Dark Earth color is one of the hottest trends today. Matches Magpul FDE Color, this is sure to amaze your fellow shooters. Please note: This is not an anodized item. This design is heavy duty and designed to compete in the most extreme conditions. 

• Custom Cerakote FDE Flat Dark Earth Interior & Exterior
• Matches Magpul FDE Color
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut 
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 4-40×1/4 For your RMR
• Proudly made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote FDE Flat Dark Earth – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Bronze – USA MADE

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. Unique cerakote burnt bronze color is one of the newest and hottest trends today. Sometimes called copper, burnt orange or scorched earth, this color is sure to amaze your fellow shooters. Please note: This is not an anodized item. This design is heavy duty and designed to compete in the most extreme conditions. 

• Custom Cerakote Burnt Bronze Coating Interior & Exterior
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut 
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 4-40×1/4 For your RMR
• Proudly made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Bronze – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Unfinished / Raw / Bare USA Made

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? Join the Space Force and look cool with the Flat Dark Mars Orange. The world is your oyster. Or leave it alone to match your bare lower!

• Bare, Unfinished, Raw finish.
• Gen 3 Compatible
•  Machined of 17-4 Heat Treated Stainless Steel
•  Custom Top & Side Cuts with Rear Cocking Serrations 
•  No Internal Parts Included
•  Trijicon RMR Cut 
•  Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required. 
•  Works with polymer 80
• TPI 4-40×1/4 For your RMR
• Proudly Made in the USA

Notes

• Slide only, RMR mounting screws (or any other hardware) is not included
• The screw sight post does not need to be over tightened or it will snap inside.  The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Unfinished / Raw / Bare USA Made appeared first on Total War Tactical.

Augment your magazines with these lightweight (1 5/8 oz ea) aluminum base pads for your Glock . These floor plates provide an additional gripping surface for more positive control of the pistol as well as gripping the magazine during mag swaps. Constructed of 6061 billet anodized aluminum, the added weight helps the magazine clip drop free easily for faster reloads. The thick pad also helps protect the clip from when dropping it on the ground in various practical sports. The blue and red colors make for a nice way to recognize or organize your mags and is hard anodized to ensure a long lasting, durable color finish.

Note: These do not increase magazine capacity! Perfect for regions that have high capacity limiting laws.

Features:

• Weight: 1 5/8 oz ea
• Height Overall (including side rail) : 0.67 in
• Height of Base: 0.52 in
• Width: 1.12 in
• Length: 1.77 in

Includes:

• 1 x Base Pad (use selector for color option)
• 1 x Clip base pin (not pictured).

The post Tactical Aluminum Magazine Base Pad For 9mm .40 Gen 3 Glock Black Red Blue Floor Plates appeared first on Total War Tactical.