AR15 AR-15 AR SBR AR10 Replacement low profile gas block for use with slim / small diameter handguards. Hardened steel constructed to strict specifications. Uses superior clamp on design that uses the entire gas block inner surface to be friction fitted to the barrel. Skeletal design to help reduce weight. Eliminate slippage from designs where only a single or dual set screw locks it down! 0.750 ID compatible with many 223 , 556, 308 and .300 systems.

Features:

• Low profile, slim micro mini construction
• Manufactured to mil-spec standards
• Hardened steel construction
• Minimalist skeleton design reduces weight
• 0.750 Inch inner diameter, fits 0.750″ AR15 & AR10 barrels
• Clamp on design with dual set screws hold block securely

Includes:

• 1 x 0.75 inch Stainless Steel Low Profile Micro Gas Block Clamp – V2
• 1 Gas Tube Roll Pin
• 2 x Set Screws

The post AR15 AR10 0.750 inch Skeleton Clamp Low Profile Micro Mini Gas Block appeared first on Total War Tactical.

Update your carbine / rifle with this 6 Position Stock Buffer Tube . Made of durable T6-6061 aluminum CNC machined to mil-spec standards. Use with many of our collapsible/adjustable buttstocks or our fixed aluminum tactical ones. Fits most AR 15 and AR 10 upper receivers.

Features:

• Mil-Spec, not commercial diameter
• T6-6061 aluminum
• Tan Finish
• 6-Positions
• Length: 7.1875″
• Fits: AR-15, AR-10 and compatibles

The post AR15 AR AR10 AR9 300BLK 6 Position Stock Buffer Tube – Mil-Spec Diameter – TAN appeared first on Total War Tactical.

Complete your AR15 rifle project with this Ejection Port Dust Cover Complete Assembly. Protects your bolt carrier group (BCG) during storage and can be flipped closed in the field as well. Mil-spec standard and finished cerakoted FDE Flat Dark Earth for the ultimate in elemental protection.

Features:

• Compatible with AR15 uppers and compatibles (300BLK, AR9/45 with full size ejection port, etc)
• Manufactured to mil-spec standards
• Cerakote FDE durable finish

Includes:

• Ejection Port Cover Door (Dust cover)
• Steel Spring
• Steel Rod
• C-Clamp Ring

The post AR15 Ejection Port Dust Cover Complete Assembly Kit Cerakote FDE Flat Dark Earth appeared first on Total War Tactical.

Complete your AR-10 rifle project with this Ejection Port Dust Cover Complete Assembly. Protects your bolt carrier group (BCG) during storage and can be flipped closed in the field as well. Mil-spec standard and finished in cerakoted FDE Flat Dark Earth for the best in elemental protection.

Features:

• Compatible with AR10 uppers and compatibles (6.5 Creedmoor, etc)
• Manufactured to mil-spec standards
• FDE ceracote durable finish

Includes:

• Ejection Port Cover Door (Dust cover)
• Steel Spring
• Steel Rod

The post AR10 Ejection Port Dust Cover Complete Assembly Kit – Cerakote FDE Flat Dark Earth appeared first on Total War Tactical.

Improve the aim of your follow up shots with this carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil. Features internal reciprocating weights that help increase momentum. Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: approx 4.9 oz
• Length: approx 3.24 inches
• Steel Body
• Internal Reciprocating Weights for Increased Momentum and Smoother Function
• Black finish
• Easy Drop-In installation with no tools required

The post AR15 AR AR-15 Collapsible Stock Heavy Buffer 4.9oz Carbine Length – Reciprocating Weights appeared first on Total War Tactical.

Improve the aim of your follow up shots with this carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil. Features internal reciprocating weights that help increase momentum. Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: approx 5.4 oz
• Length: approx 3.26 inches
• Steel Body
• Internal Reciprocating Weights for Increased Momentum and Smoother Function
• Black finish
• Easy Drop-In installation with no tools required

The post AR15 AR AR-15 Collapsible Stock Heavy Buffer 5.4oz Carbine Length – Reciprocating Weights appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup (15.9 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design with a front end which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. The handguard is fitted on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• 7 Slot Rear Picatinny Rail Top Section
• 6 Slot Front Picatinny Rail Top Section
• Top MLOK Slots: 8
• Side/Bottom MLOK Slots: 10
• Inside Width: 1.60 inches
• Outside Height (Including top rail): 2.11 inches
• Wall Thickness: 0.06 inches
• Weight (Including barrel nut, shims and screws only): 15.9 oz
• 6 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 6 x Barrel Nut Screws
• 1 x Barrel Nut
• 1 x Shim
  1 x Hex Tool

The post 19″ AR10 LOW Profile HYBRID MLOK M-LOK Free Float DPMS Handguard Partial Top Rail appeared first on Total War Tactical.

Make a significant performance upgrade to your AR15 AR-15 AR SBR AR10 suppressor use with this replacement low profile adjustable gas block. Can be used used with slim / small diameter handguards,  it is simple to adjust and use in the field. With a set screw to increase or decrease gas flow,  allows the ability to fine tune the gas pressure on a standard direct impingement gas system. The advantages are a plenty: a large reduction in recoil, faster recoil recovery, faster sight picture acquisition between shots, heat reduction at the bolt, and a bit cleaner running. Hardened steel constructed to strict specifications. 0.750 ID compatible with many 223 , 556, 308 and .300 systems.

Features:

• Low profile, slim micro mini construction
• Manufactured to mil-spec standards
• Features +/- markings for easy gas tuning (not shown in images)
• Hardened steel construction
• Lightweight at 1.75 oz
• No cutouts allow for high strength performance
• 0.750 Inch inner diameter, fits 0.750″ AR15 & AR10 barrels
• Set screw style to adjust gas pressure
• Made in the U.S.A.

Includes:

• 1 x 0.75 inch Adjustable Steel Low Profile Micro Gas Block
• 1 x Gas Tube Roll Pin
• 1 x Gas Screw
• 1 x Lock Screw (to lock down the gas screw)
• 2 x Set Screws

The post AR15 AR-15 AR10 0.750 inch Steel Low Profile Micro Mini ADJUSTABLE Gas Block (USA MADE) -V3 appeared first on Total War Tactical.

AR15 AR-15 AR SBR AR10 Replacement low profile gas block for use with slim / small diameter handguards. Cerakoted in FDE Flat Dark Earth for the ultimate in elemental protection. Steel constructed to strict specifications. Uses superior clamp on design that uses the entire gas block inner surface to be friction fitted to the barrel. Skeletal design to help reduce weight. Eliminate slippage from designs where only a single or dual set screw locks it down! 0.750 ID compatible with many 223 , 556, 308 and .300 systems.

Features:

• Low profile, slim micro mini construction
• Manufactured to mil-spec standards
• Non-reflective, Cerakote FDE finish
• Hardened steel construction
• Minimalist skeleton design reduces weight
• 0.750 Inch inner diameter, fits 0.750″ AR15 & AR10 barrels
• Clamp on design with dual set screws hold block securely

Includes:

• 1 x 0.75 inch steel Low Profile Micro Gas Block Clamp – V2 FDE
• 1 Gas Tube Roll Pin
• 2 x Set Screws

The post AR15 AR10 0.750 inch Steel Skeleton Clamp Low Profile Micro Mini Gas Block – Cerakote FDE appeared first on Total War Tactical.

Own a unique and admirable piece of equipment by acquiring this high quality, lightweight billet upper receiver. Constructed of USA made billet 7075 T6 aluminum, this exquisite item features a slick side profile that doesn’t have a forward assist. This and the low profile brass deflector keeps the cross section slim and helps prevent equipment snags. Unique CNC cut outs help lower weight and gives an aggressive look and the flat top picatinny tactical rail system is manufactured to mil-spec standards. Cerakoted – this is a non-anodized design features a flat matte surface finish for added durability and camouflage. Fits on any standard AR-9 lower receiver (pins not included). Accepts many popular hand guards and barrel nuts. Made in the USA.

Note: Stripped upper receiver only – no internal or other parts included.

Features:

• USA Made Billet Aluminum 7075 T6
• Slick Side No Forward Assist
• Low Profile Brass Deflector
• Cerakote Finish
• Flat-Top with Picatinny rails
• Mil-Spec specifications
• Made in the U.S.A.

The post AR9 9mm AR-9 Stripped Slick Side Flat Top Upper Receiver – Cerakote Arctic White (Made in USA) appeared first on Total War Tactical.