Improve your .223 5.56 .308 7.62 precision rifle and manage recoil with this Tactical Aluminum Skeleton Minimal Adjustable Butt Stock with Cheek Rest. Lightweight at 14.75 oz and it is perfect for the tactical or 3 Gun competitive user. It is fully adjustable for shoulder length, length of pull (LOP) and features a moveable check rest. The back plate is adjustable vertically (~2.15 inches travel), allowing for that perfect shoulder height fit. The main rail is constructed of anodized aluminum and the butt stock is a strong durable polymer.  The adjustable aluminum cheek rest (~1.25 inches travel) also has a padded foam resting top for comfort. In addition, there is an recessed ambidextrous quick disconnect hole mount for QD sling attachments.  This unit clamps on (friction fitted) to any buffer tube as long as it is mil-spec (1.148 in), not commercial diameter. Multi position carbine stocks fit best due to the keyhole cross section which helps prevent rotation. But the stock does not “lock” into place like an adjustable stock. Generally it is a set it once system, best for precision shooting. Should fit most models  including bolt action and airsoft types.

Difference Between Models

The difference between the A, B and H models is that there is different CNC cut pattern in the middle of the stock. It’s purely cosmetic in nature.

Looking for other models? Check These Out:

The post AR15 AR10 Tactical Aluminum Skeleton Minimalist Adjustable Butt Stock Cheek Rest Buttstock HEX RED [HR] appeared first on Total War Tactical.

Choose AR-10 (ARMALITE) or LR-308 (DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Red Anodized Tactical 15″ Inch Ultra Light KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches HIGH Profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Note: Due to differences in the anodizing from batch to batch and as well as being different items, the included rails may not exactly match the color of the handguard.

Requires a Low Profile gas block! (Not included)

Features:

• Matches HIGH Profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 and/or LR-308 (choose from menu)
• Length: 15.0 inches
• Outside Width: 2 1/32 Inches *
• Outside Height (Including top rail): 2 7/32 inches *
• Inside Diameter: 1 24/32 inches *
• Weight (Including barrel nut, screws and shims): 10.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Includes:

• 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Red KEYMOD Free Float Handguard Grip
• 2 x 9 Slot Picatinny Rails & screws
• 2 x Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308 (choose from menu)
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

The post 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light HIGH PROFILE Red KEYMOD Free Float Handguard Grip appeared first on Total War Tactical.

Choose AR-10 (ARMALITE) or LR-308 (DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Red Anodized Tactical 15″ Inch Ultra Light KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Note: Due to differences in the anodizing from batch to batch and as well as being different items, the included rails may not exactly match the color of the handguard.

Requires a low profile gas block! (Not included)

Features:

• Matches low profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 and/or LR-308 (choose from menu)
• Length: 15.0 inches
• Outside Width: 2 1/32 Inches *
• Outside Height (Including top rail): 2 7/32 inches *
• Inside Diameter: 1 24/32 inches *
• Weight (Including barrel nut, screws and shims): 10.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Includes:

• 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Red KEYMOD Free Float Handguard Grip
• 2 x 9 Slot Picatinny Rails & screws
• 2 x Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308 (choose from menu)
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

The post 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Low Profile GOP Red KEYMOD Free Float Handguard Grip appeared first on Total War Tactical.

Improve your .223 5.56 .308 7.62 precision rifle and manage recoil with this Tactical Aluminum Skeleton Minimal Adjustable Butt Stock with Cheek Rest. Lightweight at 14.8 oz and it is perfect for the tactical or 3 Gun competitive user. It is fully adjustable for shoulder length, length of pull (LOP) and features a moveable check rest. The back plate is adjustable vertically (~2.15 inches travel), allowing for that perfect shoulder height fit. The main rail is constructed of anodized aluminum and the butt stock is a strong durable polymer.  The adjustable aluminum cheek rest (~1.25 inches travel) also has a padded foam resting top for comfort. In addition, there is an ambidextrous quick disconnect hole mount for QD sling attachments.  This unit clamps on (friction fitted) to any buffer tube as long as it is mil-spec (1.148 in), not commercial diameter. Multi position carbine stocks fit best due to the keyhole cross section which helps prevent rotation. But the stock does not “lock” into place like an adjustable stock. Generally it is a set it once system, best for precision shooting. Should fit most models  including bolt action and airsoft types.

Difference Between Models

The difference between the A and B models is that there is different CNC cut pattern in the middle of the stock. It’s purely cosmetic in nature.

Looking for other models? Check These Out:

The post AR15 AR10 Tactical Red Aluminum Skeleton Minimalist Adjustable Butt Stock Cheek Rest Buttstock [BR] appeared first on Total War Tactical.

Lighten your AR15 AR setup (only 12.9 oz!!) and show off to your buds with this RED anodized 15″ Inch Ultra Light Slim MLOK Free Float Hand Guard Fore Rail Grip system. Cool hot rod red anodized color is sure to amaze your friends! Free floating design helps with accuracy. This is a single piece, with no barrel cap. M-LOCK  design allows for rail or M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching optics, hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 15.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 12.9 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 15″ Inch Lightweight Slim RED MLOK Free Float Hand Guard
• 4 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 15″ Inch AR15 AR-15 AR Ultra Light Slim GOP RED MLOK M-LOK Free Float HandGuard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (only 9.6 oz!!) and show off to your fellow elite shooters with this Anodized RED Colored 10″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 9.6 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 10″ Inch Lightweight Slim RED KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 10″ Inch AR15 AR-15 AR Ultra Light Slim Anodized GOP RED KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (8.0 oz!!) and show off to your fellow elite shooters with this Anodized RED Colored 12″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 8.0 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 7″ Inch Lightweight Slim RED KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR-15 AR Ultra Light Slim Anodized GOP RED KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (less than 13.0 oz!!) and show off to your fellow elite shooters with this Anodized RED Colored 15″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 15.0 inches
• Inside Diameter: 1.37 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 12.7 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 15″ Inch Lightweight Slim RED KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 15″ Inch AR15 AR-15 AR Ultra Light Slim Anodized GOP RED KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR SBR setup (only 11.0 oz!!) and show off to your fellow shooters with this RED 12″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system. Cool Chinese RED anodized color is sure to amaze your friends! Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 12.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 11.0 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 12″ Inch Lightweight Slim RED KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 12″ Inch AR15 AR-15 AR Ultra Light Slim Hunting GOP RED KEYMOD Free Float HandGuard appeared first on Total War Tactical.