Upgrade your 5.56 .223, AR Rifle with this red Anodized AR Charging Handle. Featuring a knurled ambi latch that allows for fast and smooth operation under extreme tactical conditions. Great for those who want to match their rifle colors.

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Ambidextrous Knurled Ribbed Latches for Easy Operation
• Smooth Operation Under Extreme Conditions
• Anodized Red
• Fits: AR15 and Compatibles

The post AR15 AR9 Ambidextrous Enhanced Knurled Charging Handle – GOP RED appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Mini Micro Aluminum Anodized Keymod Key mod MLOK M-Lock M-LOK Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Made of a high quality 6061 anodized aluminum that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Keymod ready and with the special insert, it can mount to MLOK systems as well!

Fits on Keymod or M-Lock systems only! Does not fit on picatinny rails!!

Features

• Fits on key mod and M-LOK handguards
• High quality 6061 aluminum CNC construction
• Anodized Red Finish
• Light weight at ~ 0.50 oz
• Low profile, single piece design

Includes

• Aluminum Keymod M-LOK Handstop
• MLOK Insert
• Installation Screws
• Installation Nuts (Keymod & MLOK)
• Installation Tool

The post Aluminum Anodized Keymod or MLOK MINI Micro Handstop Hand Stop – GOP Red appeared first on Total War Tactical.

Complete your AR15 rifle project with this Ejection Port Dust Cover Complete Assembly. Protects your bolt carrier group (BCG) during storage and can be flipped closed in the field as well. Mil-spec standard and finished in anodized red.

Features:

• Compatible with AR15 uppers and compatibles (300BLK, AR9/45 with full size ejection port, etc)
• Manufactured to mil-spec standards
• Red anodized finish

Includes:

• Ejection Port Cover Door (Dust cover)
• Steel Spring
• Steel Rod
• C-Clamp Ring

The post AR15 AR9 300BLK Ejection Port Dust Cover Complete Assembly Kit – GOP Red appeared first on Total War Tactical.

Show your support and bedazzle your AR15, AR Rifle with this BAT Style Charging Handle in Anodized Red. Featuring an oversized, ribbed left latch that allows for fast and smooth operation under extreme tactical conditions.

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Oversized Ribbed Latch for easy operation
• Bat Wing Style
• Smooth Operation under Extreme Conditions
• Anodized Red Finish
• Fits: AR-15, AR15, .300 BLK and compatibles

The post AR15 AR AR-15 BAT Wing Style Charging Handle w/ Oversized Latch – GOP Red appeared first on Total War Tactical.

Kick ass in your competition and and show support for Conservatives  by getting one of these lightweight Mil-Spec Bolt Carrier Group Assemblies.  While NOT featuring full-auto capability, it has a 9310 Steel MPI Bolt along with a 7075 Polished Aluminum Carrier. The unique light weight construction and anodized finish ensures this BCG’s reduced recoil and increased cycle speed. Proudly Made in the U.S.A.

Features:

• NOT FULL AUTO CAPABLE
• Weight: 5.9oz
• Mil-Spec Competition Shooting Design
• Precision Machined
• 7075 Polished Aluminum Carrier
• MPI Bolt – 9310 steel material
• Laser Marked MPI Logo
• 8620 Gas Carrier
• Anodized Red Finish
• Fits: AR-15 .223 5.56 / .300 BLK and compatibles.

The post AR15 AR BCG Lightweight Competition Aluminum Bolt Carrier Group – GOP Red (Made in USA) appeared first on Total War Tactical.

Show your support and bedazzle your AR15, AR Rifle with this Battle Hammer Charging Handle in Anodized Red. Featuring an oversized left latch that allows for fast and smooth operation under extreme tactical conditions.

Note: This item does not match our Red handguards. It matches better with our gas blocks, buffer tubes and other items

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Oversized Latch for easy operation
• Battle Hammer Style
• Smooth Operation under Extreme Conditions
• Anodized Red Finish
• Fits: AR-15, AR15, .300 BLK and compatibles

The post AR15 AR AR-15 Battle Hammer Charging Handle w/ Oversized Latch – GOP Red appeared first on Total War Tactical.

Enhance and complete your Lower Receiver with this AR15 AR Enhanced Aluminum Drop-In Trigger Guard. Manufactured of 6061 Aluminum, it features a anodized finish. Has a wide, extended bottom which is skeletonized for reduced weight.

The post AR15 AR Enhanced Aluminum Drop-In Trigger Guard appeared first on Total War Tactical.

Look snazzy and upgrade your 7.62 .308 Ar10 , AR Rifle with this Charging Handle in Anodized AR Charging Handle.  Hot rod red anodized finish. Featuring a knurled ambi latch that allows for fast and smooth operation under extreme tactical conditions. Great for those who want to match their rifle colors.

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Ambidextrous Knurled Ribbed Latches for Easy Operation
• Smooth Operation Under Extreme Conditions
• Hot rod red anodized finish.
• Fits: AR10 AR-10 6.5CM 308 762 and Compatibles

The post AR10 AR-10 Ambidextrous Enhanced Knurled Charging Handle – GOP RED appeared first on Total War Tactical.

Lighten your setup (13.25 oz) with this 17″ Inch Free Float Handguard Rail System. Free Float design helps with accuracy. This is a single piece, with no barrel cap. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! Mil-spec ANODIZED finish. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Features a separate triple nut and doesn’t screw into the handguard itself! No more stripping the handguard! Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Separate Barrel Nut Clamp Screws & Triple Nut for Superior Installation
• Length: 17  inches
• Outside Width: 1.54 Inches
• Inside Width: 1.36 Inches
• Outside Height (Including top rail): 1.98 Inches
• Weight (Including barrel nut but no rails): 12 7/8 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Allen screw clamp separator for easy installation onto barrel nut

Includes:

• 1 x 17″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws
• 1 x Barrel Nut Screw Triple Nut
• 1 x Barrel Nut Screw Allen Hex Wrench

Parts that match this color: RedCR

The post 17″ Inch AR15 .223 5.56 556 Ultra Light Slim Clamp Style RED Anodized MLOK M-LOK Free Float Handguard Rail Grip appeared first on Total War Tactical.

Augment your AR 15 with this Charging Handle, Forward Assist and Ejection Port Cover. Compatible with many .223 / 5.56 / .300 upper receiver systems,  it is Red anodized to amaze all onlookers. Featuring a smooth charging handle, it is ready to rock and roll in no time! All parts manufactured to Milspec standards to ensure smooth operation under extreme tactical situations.

AR Charging Handle

• Manufactured to mil-spec standards
• 6061-T6 Aircraft Aluminum
• Red Anodized Finish

AR Dust Cover Complete Assembly

• Ejection Port Cover Door (Dust cover)
• Steel Spring
• Steel Rod
• C-Clamp
• Red Anodized Finish

AR Forward Assist

• Plunger
• Spring
• Retainer Pin
• Red Anodized Finish

Please Note: The red anodizing on these parts is a close, but not an exact match to our Red handguards.

The post AR15 AR-15 AR Charging Handle Forward Assist and Ejection Dust Cover Door – Red appeared first on Total War Tactical.