Pistol Slide Archives - Total War Tactical

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – B Model – Cerakote Black – USA MADE

Total War Tactical — Sat, 20 Feb 2021 01:01:21 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – B Model – Cerakote Black – USA MADE

Custom Cerakote Coating Interior & Exterior
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & 6 Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut compatible with some Holosun, Riton, SwampFox, Vector Optics and NCStar Red Dot Sights
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 6/32 x 1/4 inch threads for RMR
Proudly Made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – B Model – Cerakote Black – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Black – USA MADE

Edward — Tue, 19 Nov 2019 19:56:53 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Black – USA MADE

Custom Cerakote Black Coating Interior & Exterior
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 4-40×1/4 For your RMR
Proudly Made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Gen 3 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Black – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Grey – USA MADE

Edward — Sun, 17 Nov 2019 08:14:56 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Grey – USA MADE

Custom Cerakote Gray Coating Interior & Exterior
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 4-40×1/4 For your RMR
Proudly made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Grey – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote FDE Flat Dark Earth – USA MADE

Edward — Sun, 17 Nov 2019 08:08:43 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote FDE Flat Dark Earth – USA MADE

Custom Cerakote FDE Flat Dark Earth Interior & Exterior
Matches Magpul FDE Color
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 4-40×1/4 For your RMR
Proudly made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote FDE Flat Dark Earth – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Bronze – USA MADE

Edward — Thu, 03 Oct 2019 06:56:42 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Bronze – USA MADE

Custom Cerakote Burnt Bronze Coating Interior & Exterior
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 4-40×1/4 For your RMR
Proudly made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Cerakote Bronze – USA MADE appeared first on Total War Tactical.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Unfinished / Raw / Bare USA Made

Edward — Thu, 03 Oct 2019 06:42:36 +0000

Note: This item requires an additional 3-4 days processing time.

Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Unfinished / Raw / Bare USA Made

Upgrade your Gen 3 Glock 19 Pistol with this slick lightweight custom cut out slide upper. Machined to exact tolerances with 17-4 Heat Treated Stainless Steel, it features aggressive top and side cut outs. The rear cocking serrations are easy to grip and have Trijicon RMR Cut Outs. Accepts standard Glock G19 / G17 sights (not included) and works with poly 80s frames as well. This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? Join the Space Force and look cool with the Flat Dark Mars Orange. The world is your oyster. Or leave it alone to match your bare lower!

Bare, Unfinished, Raw finish.
Gen 3 Compatible
Machined of 17-4 Heat Treated Stainless Steel
Custom Top & Side Cuts with Rear Cocking Serrations
No Internal Parts Included
Trijicon RMR Cut
Accepts standard Glock G19 and G17 sights (not included). Hand fitting may be required.
Works with polymer 80
TPI 4-40×1/4 For your RMR
Proudly Made in the USA

Notes

Slide only, RMR mounting screws (or any other hardware) is not included
The screw sight post does not need to be over tightened or it will snap inside. The torque specs should be under 5 lbs. Gunsmithing is required by Glock certified armorer.

The post Glock 19 G19 Lightweight Stainless Steel Pistol Slide with Trijicon RMR Cut Out – Unfinished / Raw / Bare USA Made appeared first on Total War Tactical.