Properly index, position and protect your support hand using this Polymer MLOK Hand stop Barricade Stop Tactical Support Grip Rail Cover Panel. Can be used in the regular position when using the C-Clamp (Thumb over Bore) support technique.  It will also help prevent your hand from extending near or past the barrel end. Ultra light – making it one of the lightest handstops out there. Made of a high quality polymer plastic that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. 2 slot inserts provide a stable, non-moveable/rotating attachment superior to single screw models.

Fits on MLOK systems only! Does not fit keymod key mod or on picatinny rails!!

Features

• • Fits on MLOK handguards
  • Enhanced angled grip for comfort

• High quality heat resistant polymer construction
• Reversible for barricade stop rest use
• Light weight
• Reversible, low profile, single piece design

Includes

• 1 x Polymer MLOK Handstop
• 1 x Installation Screw
• 1 x Installation Nut

The post Polymer MLOK Handguard Rail Single Angle Handstop Forward Grip Stop appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 9.8 oz!!) and show off to your fellow elite shooters with this tactical 10″ Inch free float handguard  system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches HIGH profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Flat matte paint and baked finish
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.8 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ AR10 Free Float Handguard
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 HIGH PROFILE MLOK MLOCK Free Float Handguard Rail – FDE Flat Dark Earth Desert Tan Sand appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 9.6 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 10″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches hi profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches high profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.6 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ Inch .308 / 7.62 AR10 AR-10 HIGH PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your AR-15 AR15 .223, .556 or .300 BLK setup (only 13.9 oz) with this 15″ Inch Lightweight Ultra Light Slim Clamp Style Black Anodized All MLOK Free Float Handguard Rail System.  Free Float design helps with accuracy. This is a single piece, with no barrel cap. All m-lock design allows for attachments to be placed not only at the 3/6/9 o-clock positions, but also the 45 degree 2/4/6/8 o’clock positions. Great for attaching hand stops or light switch panels! Mil-spec Black ANODIZED finish. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• All MLOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Length: 15 inches
• Outside Width: 1.58 Inches
• Outside Height (Including top rail): 2.04 inches
• Inside Width (Factoring in interior ribbing): 1.33 inches
• Weight (Including barrel nut but no rails): 15.6 oz
• Two Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 15″ Inch Ultra Light Slim Clamp Style Black Anodized All MLOK Free Float Handguard Rail System
• 1 x Steel Barrel Nut
• 2 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 15″ AR15 Slim Clamp Style Black Anodized All MLOK Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup (15.9 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design with a front end which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. The handguard is fitted on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• 7 Slot Rear Picatinny Rail Top Section
• 6 Slot Front Picatinny Rail Top Section
• Top MLOK Slots: 8
• Side/Bottom MLOK Slots: 10
• Inside Width: 1.60 inches
• Outside Height (Including top rail): 2.11 inches
• Wall Thickness: 0.06 inches
• Weight (Including barrel nut, shims and screws only): 15.9 oz
• 6 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 6 x Barrel Nut Screws
• 1 x Barrel Nut
• 1 x Shim
  1 x Hex Tool

The post 19″ AR10 LOW Profile HYBRID MLOK M-LOK Free Float DPMS Handguard Partial Top Rail appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup ( ~1 lbs 1 oz ) with this 15″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK (not keymod) design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there is  a full length flat top picatinny rail.  Also the top rail has holes cut into it to further save weight. Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

The handguard is friction fitted, clamped on to a DPMS compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made In the U.S.A

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Construction
• FULL LENGTH Flat Top Picatinny Rail
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Unfinished bare aluminum
• Length: 15.0  inches
• Outside Width: 1.73 inches
• Inside Width: 1.56 inches
• Outside Height (Including top rail): 2.13 inches
• Wall Thickness: 0.11 – 0.13 inches
• Weight (Including barrel nut and screws only): about 1 lbs 1 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made In the USA

Includes:

• 1 x 15″ AR10 Lightweight Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard
• 3 x Barrel Nut Screws
• 1 x Steel Barrel Nut

The post 15″ AR10 Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard USA Made – Bare Aluminum appeared first on Total War Tactical.

Update your precision fighting AR with this  light weight (14.8 oz ) handguard system. Free Float design helps with accuracy. Full length rail is a single piece design which can not accommodate an end cap.  Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9/12 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!  Hard Coat Anodized Black finish.  The handguard is friction fitted, clamped on to a  steel barrel nut, which is held in place by hex screws. The screws have individual nuts so there is no stripping the threads! The off-set screw threads help prevent loosening of the nuts. Fits on any 556 223 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits AR15 uppers
• One Piece Free Float High Quality Construction
• 6061-T6 Aluminum Material
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Anodized Matte Black Finish
• Longest Length: 19.5  inches
• Outside Width: 1.90 inches
• Inside Width: 1.36 inches
• Outside Height (MLOK Areas): 1.82 inches
• Outside Height (Rail Areas): 1.95 inches
• Wall Thickness: 0.08 inches
• Weight (Including barrel and screws only): 14.8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit
• 2 Off-Set nuts to help prevent loosening

Includes:

• 1 x 19.5″ AR15 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 19.5″ AR15 Clamp HYBRID Top Cut Rail MLOK M-LOK Free Float Handguard appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup ( ~1 lbs 3.25 oz ) with this 18″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK (not keymod) design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there is  a full length flat top picatinny rail.  Also the top rail has holes cut into it to further save weight. Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

The handguard is friction fitted, clamped on to a DPMS compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made In the U.S.A

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Construction
• FULL LENGTH Flat Top Picatinny Rail
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Unfinished bare aluminum
• Length: 18.0  inches
• Outside Width: 1.73 inches
• Inside Width: 1.56 inches
• Outside Height (Including top rail): 2.13 inches
• Wall Thickness: 0.11 – 0.13 inches
• Weight (Including barrel nut and screws only): about 1 lbs 3.25 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made In the USA

Includes:

• 1 x 18″ AR10 Lightweight Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard
• 3 x Barrel Nut Screws
• 1 x Steel Barrel Nut

The post 18″ AR10 Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard USA Made – Bare Aluminum appeared first on Total War Tactical.

Enhance your AR15 setup and show off to your fellow shooters with this high quality rail system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal CNC cuts feature a lighter weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. Features a full top picatiiny rail and 4 slot side and bottom rails at the end. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Includes 2 rear integrated reinforced QD ports, compatible with many sling quick disconnect push button ends out there. Clamp handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat Top Picatinny Rail for a  monolithic look
• 4 Slot Side and Bottom Rails at the Muzzle End
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 15 inches top,  ~14.25 inches bottom
• Outside Width (Front Rails): 2.12 inches
• Outside Width (Middle MLOK): 1.53 inches
• Outside Height (Front Rails): 2.23 inches
• Outside Height (Middle): 1.34 inches
• Inside Diameter: 1.37 inches
• Ambidextrous QD Ports on Rear Left and Right Sides
• Weight (Including barrel nut, main screws): 15.4 oz
• Clamp Style Barrel Nut System

The post 15″ AR15 Slim QD MLOK Free Float Handguard Full Top Rail Quad Slanted End appeared first on Total War Tactical.

Update your precision fighting AR with this  light weight (9.8 oz ) handguard system. Heavy Duty and Free Float design helps with accuracy. Full length rail is a single piece design which can not accommodate an end cap.  Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Integrated micro handstop located at the muzzle end. Hard Coat Anodized Black finish.  The handguard is friction fitted, clamped on to a  steel barrel nut, which is held in place by hex screws.  The screws have individual nuts so there is no stripping the threads! Also features anti rotation tabs! Fits on any 556 223 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits AR15 uppers
• One Piece Free Float High Quality Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Integrated Front Mini Handstop
• Steel Barrel Nut
• Anti-Rotation Tabs
• Anodized Black Finish
• Longest Length: 15.0  inches
• Outside Width (MLOK Areas) : 1.50 inches
• Outside Width (Rail Areas) : 2.10 inches
• Inside Width: 1.33 inches
• Outside Height (MLOK Areas): 1.83 inches
• Outside Height (Rail Areas): 1.93 inches
• Wall Thickness: 0.08 inches
• Weight (Including barrel and screws only): 9.8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 15″ A15 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 15″ AR15 Clamp HYBRID Top Cut Rail MLOK M-LOK Free Float Handguard with Integrated Mini Hand Stop appeared first on Total War Tactical.