Lighten your precision .308 7.62 setup ( ~1 lbs 1 oz ) with this 15″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK (not keymod) design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there is  a full length flat top picatinny rail.  Also the top rail has holes cut into it to further save weight. Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

The handguard is friction fitted, clamped on to a DPMS compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made In the U.S.A

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Construction
• FULL LENGTH Flat Top Picatinny Rail
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Unfinished bare aluminum
• Length: 15.0  inches
• Outside Width: 1.73 inches
• Inside Width: 1.56 inches
• Outside Height (Including top rail): 2.13 inches
• Wall Thickness: 0.11 – 0.13 inches
• Weight (Including barrel nut and screws only): about 1 lbs 1 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made In the USA

Includes:

• 1 x 15″ AR10 Lightweight Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard
• 3 x Barrel Nut Screws
• 1 x Steel Barrel Nut

The post 15″ AR10 Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard USA Made – Bare Aluminum appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup ( ~1 lbs 3.25 oz ) with this 18″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK (not keymod) design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there is  a full length flat top picatinny rail.  Also the top rail has holes cut into it to further save weight. Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

The handguard is friction fitted, clamped on to a DPMS compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made In the U.S.A

Requires micro low profile gas block! (Not included)

Features:

• Fits LOW PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Construction
• FULL LENGTH Flat Top Picatinny Rail
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Unfinished bare aluminum
• Length: 18.0  inches
• Outside Width: 1.73 inches
• Inside Width: 1.56 inches
• Outside Height (Including top rail): 2.13 inches
• Wall Thickness: 0.11 – 0.13 inches
• Weight (Including barrel nut and screws only): about 1 lbs 3.25 oz
• 3 Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made In the USA

Includes:

• 1 x 18″ AR10 Lightweight Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard
• 3 x Barrel Nut Screws
• 1 x Steel Barrel Nut

The post 18″ AR10 Low Profile D-END Full Top Rail MLOK M-LOK Free Float DPMS Handguard USA Made – Bare Aluminum appeared first on Total War Tactical.

Complete your AR-10, 6.5CM 6.8BLK Blackout and compatibles by acquiring this high quality, lightweight billet upper receiver. Constructed of USA made billet aluminum, this exquisite item features an combined brass deflector/ forward assist, allowing the cross section to be slim and helps prevent equipment snags. The flat top picatinny tactical rail system is manufactured to mil-spec standards and is a low profile rail height that aligns with many of the modern 308 / AR-10 / 7.62 low profile handguards (especially ours!) . This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DIY your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? Join the Space Force and look cool with the Flat Dark Mars Orange. The world is your oyster. Or leave it alone to match your bare lower!  Fits on any standard LR-308 lower receiver (NOT ARMALITE AR-10). Accepts many popular low profile hand guards (including DPMS, etc) and barrel nuts. Made in the USA.

Note: Stripped upper receiver only – no internal or other parts included. Due to having to use several forge companies to assure this item stays in stock , forge marks may vary.

Features:

• Matches LR-308 Lower Receiver (NOT ARMALITE AR-10)
• Matches LOW Profile handguards
• Barrel nut threaded at 16TPI LR308, DPMS compatible
• Overall length: ~ 9 3/16 inches
• USA Made Billet Aluminum
• 7075-T6 Forged Aluminum
• Combination Brass Deflector & Forward Assist
• Bare Unfinished Aluminum
• Flat-Top with Picatinny rails
• Mil-Spec specifications
• Made in the U.S.A.

The post AR10 LR-308 Stripped LOW PROFILE Semi Slick Side Billet Flat Top Upper Receiver (Made in USA) – Bare Aluminum appeared first on Total War Tactical.

Complete your AR15, AR9, 300BLK and compatibles by acquiring this high quality, lightweight Forged upper receiver. Constructed of USA made 7075 T6 billet aluminum, this exquisite item features a slick side profile that doesn’t have a forward assist. This keeps the cross section slim and helps prevent equipment snags.  The ejection port does not require a dust cover. Great for those that wish to minimalize their parts list. The flat top picatinny tactical rail system is manufactured to mil-spec standards. This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DIY your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? Join the Space Force and look cool with the Flat Dark Mars Orange. The world is your oyster. Or leave it alone to match your bare lower! Fits on any standard 5.56 / .223 lower receiver (pins not included). Accepts many popular hand guards and barrel nuts. Made in the USA.

Note: Stripped upper receiver only – no internal or other parts included.

Features:

• USA Made Billet Aluminum 7075 T6
• Slick Side No Forward Assist
• Ejection Port Dust Cover NOT needed
• Bare Aluminum un-anodized finish
• Flat-Top with Picatinny rails
• Mil-Spec specifications
• Weight 7.2 oz
• Made in the U.S.A.

The post AR15 Stripped Slick Side Forged Flat Top Upper Receiver – No Dust Cover Needed – Bare Aluminum V2 (Made in USA) appeared first on Total War Tactical.

Lighten your AR Pistol setup (5.4 oz) with this 4.5″ Inch Free Float Handguard Rail System. Short length is great for your pistol or SBR setup. Free Float design helps with accuracy. This is a single piece, and a barrel cap can not be installed. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! The aluminum construction, anodized design features a bare unfinished surface. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 9mm setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Note: This product may contain some manufacturing/tool blemishes that are common to raw, unfinished surfaces! They are cosmetic in nature and can usually be buffed or bead blasted away. Or it may be covered up with the finish of your choice!

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Bare Unfinished
• Steel Barrel Nut
• Length: 4.5 inches (Rear to Forward Point of D-End)
• Top Rail Length: 4.25 Inches
• Outside Height (Including top rail): 2.03 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no attachments or rails): 5.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made in the U.S.A.

Includes:

• 1 x 4.5″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 4.5″ Inch AR15 AR9 Pistol Clamp MLOK Free Float Handguard Rail Grip D-End – BARE appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (only 9.75 oz!!) and show off to your fellow elite shooters with this Anodized Tactical BARE ALUMINUM Non – Colored 10″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 10.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Inside Width: 1.37 inches
• Weight (Including barrel nut, screws and shims): 9.75 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 10″ Inch Lightweight Slim BARE ALUMINUM KEYMOD Free Float Hand Guard
• 2 x Tension Timing Shims
• 2 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 10″ Inch AR15 AR-15 AR Ultra Light Slim BARE ALUMINUM KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (only 8.0 oz!!) and show off to your fellow elite shooters with this Anodized Tactical BARE ALUMINUM Non – Colored 7″ Inch Ultra Light Slim KEYMOD Free Float HandGuard Fore Rail Grip system.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Inside Width: 1.37 inches
• Weight (Including barrel nut, screws and shims): 8.0 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 7″ Inch Lightweight Slim BARE ALUMINUM KEYMOD Free Float Hand Guard
• Tension Timing Shims
• Roll Pin
• 1 x Steel Barrel Nut
• Barrel Nut Screws
• Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR-15 AR Ultra Light Slim BARE ALUMINUM KEYMOD Free Float Handguard appeared first on Total War Tactical.

Lighten your setup (8.4 oz) with this 7″ Inch Free Float Handguard Rail System. The 7 inch actual length is sure to amaze your friends! Free Float design helps with accuracy.  This is a single piece foregrip that is a slim diameter with an open “C” curved style end. Because of this, no end cap can be installed.  MLOK design allows for rail accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top/bottom placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching hand stops, handguards, picatinny rails or light switch panels!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Note: This product may contain some manufacturing/tool blemishes that are common to raw, unfinished surfaces! They are cosmetic in nature and can usually be buffed or bead blasted away. Or it may be covered up with the finish of your choice!

Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Length: 7 inches
• Outside Height (Including top rail): 2.37 Inches
• Outside Width: 1.62 Inches
• Inside Width: 1.38 Inches
• Wall thickness: 0.12 Inches
• Weight (Including barrel nut but no rails): 8.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 7″ Inch Handguard Rail System  – Bare Aluminum V2
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 7″ Inch AR15 Clamp Hybrid MLOK Free Float Handguard Rail Grip “C” Front – Bare Aluminum – [V2] appeared first on Total War Tactical.

Lighten your setup (less than 9.0 oz) with this 7″ Inch Free Float Handguard Rail System. The 7 inch actual length is sure to amaze your friends! Free Float design helps with accuracy. This is a single piece, with no barrel cap. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels!

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Note: This product may contain some manufacturing/tool blemishes that are common to raw, unfinished surfaces! They are cosmetic in nature and can usually be buffed or bead blasted away. Or it may be covered up with the finish of your choice!

Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Length: 7 inches
• Outside Height (Including top rail): 2.0 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no rails):  9.0 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly made in the U.S.A.

Includes:

• 1 x 7″ Inch Handguard Rail System  – Bare Aluminum V2
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 7″ Inch AR15 Clamp MLOK Free Float Handguard Rail Grip – Bare Aluminum – [V2] appeared first on Total War Tactical.

Lighten your AR15 AR-15 AR Rifle setup (only 11.0 oz!!) and show off to your fellow elite shooters with this Anodized Tactical BARE ALUMINUM Non – Colored 13.5″ Inch Ultra Light Slim MLOK M-LOK Free Float HandGuard Fore Rail Grip system.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Free floating forerail design helps with accuracy. This is a single piece foregrip, with no barrel cap. Key mod design allows for rail or MLOK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK M-LOK CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 13.5 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Inside Width: 1.37 inches
• Weight (Including barrel nut, screws and shims): 11.0 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 13.5″ Inch Lightweight Slim BARE ALUMINUM MLOK M-LOK Free Float Hand Guard
• 4 x Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 13.5″ Inch AR15 AR-15 AR Ultra Light Slim BARE ALUMINUM MLOK M-LOK Free Float Handguard appeared first on Total War Tactical.