Enhance your AR15 setup and show off to your fellow shooters with this high quality rail system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal CNC cuts feature a lighter weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. Features a full top picatiiny rail and 4 slot side and bottom rails at the end. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Includes 2 rear integrated reinforced QD ports, compatible with many sling quick disconnect push button ends out there. Clamp handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat Top Picatinny Rail for a  monolithic look
• 4 Slot Side and Bottom Rails at the Muzzle End
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 15 inches top,  ~14.25 inches bottom
• Outside Width (Front Rails): 2.12 inches
• Outside Width (Middle MLOK): 1.53 inches
• Outside Height (Front Rails): 2.23 inches
• Outside Height (Middle): 1.34 inches
• Inside Diameter: 1.37 inches
• Ambidextrous QD Ports on Rear Left and Right Sides
• Weight (Including barrel nut, main screws): 15.4 oz
• Clamp Style Barrel Nut System

The post 15″ AR15 Slim QD MLOK Free Float Handguard Full Top Rail Quad Slanted End appeared first on Total War Tactical.

Lighten your AR15 setup  and show off to your fellow shooters with this ultralight system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 7.25 inches top,  ~6.5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 7.75 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 7″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 7″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 7.25 inches top,  ~6.5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 7.75 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 7″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 7″ AR AR15 Slim Clamp Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup (only 1 lb 0.6 oz!!) and show off to your fellow shooters with this ultralight system.  Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels! 

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Un-anodized bare aluminum finish
• Length: 15 inches top,  ~14 5/32 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 11 3/8 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy installation onto barrel nut

Includes:

• 1 x 15″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 15″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard – Bare Aluminum appeared first on Total War Tactical.

Lighten your AR15 setup  and show off to your fellow shooters with this ultralight system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 10 inches top,  ~9 1/4 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 9.0 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 10″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 10″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 10 inches top,  ~9 1/4 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 9.1 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 10″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 10″ AR AR15 Slim Clamp Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup (only 10.25 oz!!) and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 12 inches top,  ~11 2/5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 10.25 oz
• Clamp Style Barrel Nut System

Includes:

• 1 x 12″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 12″ AR AR15 Slim Clamp Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup (only 10.25 oz!!) and show off to your fellow shooters with this ultralight system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 12 inches top,  ~11 2/5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 10.25 oz
• Clamp Style Barrel Nut System

Includes:

• 1 x 12″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 12″ AR AR15 Slim Clamp Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup (only 1 lb 0.6 oz!!) and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 15 inches top,  ~14 5/32 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 11 3/8 oz
• Clamp Style Barrel Nut System

Includes:

• 1 x 15″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 15″ AR AR15 Slim Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your AR15 setup (only 1 lb 0.6 oz!!) and show off to your fellow shooters with this ultralight system. The black anodized surface is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 15 inches top,  ~14 5/32 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 11 3/8 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy installation onto barrel nut

Includes:

• 1 x 15″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 15″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard Rail appeared first on Total War Tactical.