Properly index, position and protect your support hand using this Polymer MLOK Hand stop Barricade Stop Tactical Support Grip Rail Cover Panel. Can be used in the regular position when using the C-Clamp (Thumb over Bore) support technique.  It will also help prevent your hand from extending near or past the barrel end. Ultra light – making it one of the lightest handstops out there. Made of a high quality polymer plastic that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. 2 slot inserts provide a stable, non-moveable/rotating attachment superior to single screw models.

Fits on MLOK systems only! Does not fit keymod key mod or on picatinny rails!!

Features

• • Fits on MLOK handguards
  • Enhanced angled grip for comfort

• High quality heat resistant polymer construction
• Reversible for barricade stop rest use
• Light weight
• Reversible, low profile, single piece design

Includes

• 1 x Polymer MLOK Handstop
• 1 x Installation Screw
• 1 x Installation Nut

The post Polymer MLOK Handguard Rail Single Angle Handstop Forward Grip Stop appeared first on Total War Tactical.

Upgrade your AR platform with this unique lightweight pistol grip from Trinity Force. The slightly reduced grip  angle is a more vertical profile compared to standard pistol grips. This improves leverage and is especially useful for systems that use a shorter length of pull. Built-in oversized palm swell to mitigate pressure points. Double injected high strength polymer that is rubber coated and features aggressive texturing for a positive grip. Designed with a bottom door on the base, providing convenient storage space inside the grip.  Proudly made in the U.S.A.

Features:

The post Trinity Force AR15 AR10 AR DI Enhanced Polymer Pistol Grip w/Storage Compartment – Grey appeared first on Total War Tactical.

Upgrade your AR platform with this unique lightweight pistol grip which is skeletonized / minimized. Made from a single piece, high strength glass filled polymer and features aggressive cutouts to help reduce weight.

Note: This unit does not feature a storage compartment! 

Features:

The post AR15 AR10 Lightweight Skeletonized Polymer Tactical Pistol Grip appeared first on Total War Tactical.

Properly index, position and protect your support hand using this Polymer MLOK Hand stop Barricade Stop Tactical Support Grip Rail Cover Panel. Can be used in the regular position when using the C-Clamp (Thumb over Bore) support technique.  Can also be mounted in reverse – allowing for resting/stopping on a supported position, door frame, corner, wall etc. It will also help prevent your hand from extending near or past the barrel end. Ultra light at 0.6 oz, making it one of the lightest handstops out there. Made of a high quality polymer plastic that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. 2 screws provide a stable, non-moveable/rotating attachment superior to single screw models.

Fits on MLOK systems only! Does not fit keymod key mod or on picatinny rails!!

Features

• Fits on MLOK handguards
• Enhanced angled grip for comfort
• High quality plastic polymer construction
• Reversible for barricade stop rest use
• Light weight at 0.6 oz
• Reversible, low profile, single piece design

Includes

• 1 x Polymer MLOK Handstop
• 2 x Installation Screws
• 2 x Installation Nuts

The post Polymer MLOK Handguard Rail Angled Handstop Forward Grip Barricade Stop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this micro Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features short length to help avoid snagging on equipment. Made of a high quality polymer, it features a hollow handle, making it one of the lightest grips. There are no storage options as the handle does not have a cover! Textured stipple design allows for positive control in dynamic situations. Low Profile contoured design can be attached to thick or slim/thin style hand guards.

Fits on MLOK systems only! Does not fit on picatinny or Keymod Key Mod rails!!

Features

• Fits MLOK handguards
• Polymer construction
• Black finish
• Textured stippled surface
• Weight: 1.2 oz
• Low profile design

The post 3″ inch MLOK Handguard Rail POLYMER Mini Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Polymer MLOK M-Lock M-LOK Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features front and back serrations for positive grip. Made of a high quality heat resistant polymer that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Ceracoat finish for the best in elemental protection. Proudly made in the USA.

Fits on M-Lock systems only! Does not fit on picatinny or keymod key mod rails!!

Features

• Fits M-LOK handguards
• High quality polymer construction
• Cerkote FDE Finish
• Light weight
• Length: 1 9/16″ inch
• Height: 1 3/8″ inch
• Low profile, single piece design
• Made in the U.S.A.

The post Polymer MLOK M-LOCK MINI Micro Handguard Rail Handstop Hand Stop Grip – Cerakote FDE appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Polymer MLOK M-Lock M-LOK Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features front and back serrations for positive grip. Made of a high quality heat resistant polymer that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Proudly made in the USA

Fits on M-Lock systems only! Does not fit on picatinny or keymod key mod rails!!

Features

• Fits M-LOK handguards
• High quality polymer construction
• Light weight
• Length: 1 9/16″ inch
• Height: 1 3/8″ inch
• Low profile, single piece design
• Made in the U.S.A.

The post Polymer MLOK M-LOCK MINI Micro Handguard Rail Handstop Hand Stop Grip appeared first on Total War Tactical.

MI-Spec A2 Style pistol grip made from a single piece, high strength polymer and features aggressive texturing for a positive grip.

Features:

The post AR15 AR10 AR A2 Style Polymer Pistol Grip + Screw & Lock Washer – Cerakote FDE Flat Dark Earth appeared first on Total War Tactical.

MI-Spec A2 Style pistol grip made from a single piece, high strength polymer and features aggressive texturing for a positive grip.

Features:

The post AR15 AR10 AR A2 Style Polymer Pistol Grip + Screw & Lock Washer – Cerakoted OD Green appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Mini Micro polymer  Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features a steel QD push button port to attach a Quick Disconnect Sling! Made of a high quality polymer that is impact and corrosion resistant. Textured finger grooves on front and side ensure a positive grip. Single piece unit makes for an easier installation compared to multi panel units. Installs on an existing picatinny rail. Low Profile contoured design can be attached to thick or slim/thin style hand guards.

Fits on 1913 picatinny rails!!

Features

• Installs on 1913 MIL-STD MIL-STD Picatinny rail
• QD Sling Port
• High quality polymer
• Textured grooves
• Light weight
• Low profile, single piece design

Includes

• Polymer Handstop

The post Polymer 1913 Picatinny Rail MINI Micro Handstop Hand Stop w/ QD Sling Port appeared first on Total War Tactical.