Show your support and bedazzle your AR15, AR Rifle with this Charging Handle in Anodized Blue. Featuring an oversized Ribbed left latch that allows for fast and smooth operation under extreme tactical conditions.

Note: This item does not match our Blue handguards. It is more ‘blue’ than the anodized color on our handguards. It matches better with our gas blocks, buffer tubes and other items

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Oversized Ribbed Latch for easy operation
• BAT Wing Style
• Smooth Operation under Extreme Conditions
• Anodized Blue Finish
• Fits: AR-15, AR15, .300 BLK and compatibles

The post AR15 AR AR-15 BAT Wing Charging Handle w/ Oversized Latch – Police Law Enforcement Blue appeared first on Total War Tactical.

Enhance and complete your Lower Receiver with this AR15 AR Enhanced Aluminum Drop-In Trigger Guard. Manufactured of 6061 Aluminum, it features a anodized finish. Has a wide, extended bottom which is skeletonized for reduced weight.

The post AR15 AR Enhanced Aluminum Drop-In Trigger Guard appeared first on Total War Tactical.

Back the Blue and upgrade your 7.62 .308 Ar10 , AR Rifle with this Charging Handle in Anodized AR Charging Handle. Police Law Enforcement  Blue anodized finish. Featuring a knurled ambi latch that allows for fast and smooth operation under extreme tactical conditions. Great for those who want to match their rifle colors.

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Ambidextrous Knurled Ribbed Latches for Easy Operation
• Smooth Operation Under Extreme Conditions
• Police Law Enforcement  Blue anodized finish.
• Fits: AR10 AR-10 6.5CM 308 762 and Compatibles

The post AR10 AR-10 Ambidextrous Enhanced Knurled Charging Handle – LE POLICE BLUE appeared first on Total War Tactical.

17″ Inch AR15 .223 5.56 556 Ultra Light Slim Clamp Style LE Police Blue Cyan Anodized MLOK M-LOK Free Float Handguard Rail Grip Law Enforcement #BackTheBlue

Lighten your setup (13.25 oz) with this 17″ Inch Free Float Handguard Rail System. Free Float design helps with accuracy. This is a single piece, with no barrel cap. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! Mil-spec ANODIZED finish. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Features a separate triple nut and doesn’t screw into the handguard itself! No more stripping the handguard! Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Steel Barrel Nut
• Separate Barrel Nut Clamp Screws & Triple Nut for Superior Installation
• Length: 17  inches
• Outside Width: 1.54 Inches
• Inside Width: 1.36 Inches
• Outside Height (Including top rail): 1.98 Inches
• Weight (Including barrel nut but no rails): 12 7/8 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Allen nut clamp separator for easy installation onto barrel nut

Includes:

• 1 x 17″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws
• 1 x Barrel Nut Screw Triple Nut
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 17″ Inch AR15 .223 5.56 556 Ultra Light Slim Clamp Style LE Police Blue Cyan Anodized MLOK M-LOK Free Float Handguard Rail Grip appeared first on Total War Tactical.

Get ready to rock and roll with this latch that allows for fast and smooth operation under extreme tactical conditions. Replaces the existing latch on your AR charging handle. Includes spring and roll pin.

Latch only – charge assembly not included.

Features

• Heavy Duty Steel Construction
• Oversized Latch for quick and easy operation
• Smooth Operation under Extreme Conditions
• Extended X Design
• Black Oxide Finish
• Fits: AR-15, AR15, .300 BLK AR10 308 7.62 and compatible charging handles

The post AR15 AR AR-15 AR10 AR-10 Steel Oversized Extended Charging Oversized Latch Only [X] appeared first on Total War Tactical.

Choose AR-10 (ARMALITE) or LR-308 (DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Blue Anodized Tactical 15″ Inch Ultra Light KEYMOD Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Key mod design allows for rail or keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches High Profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Note: Due to differences in the anodizing from batch to batch and as well as being different items, the included rails may not exactly match the color of the handguard.

Requires a Low Profile gas block! (Not included)

Features:

• Matches High Profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 or LR-308 (choose from menu)
• Length: 15.0 inches
• Outside Width: 2 1/32 Inches *
• Outside Height (Including top rail): 2 7/32 inches *
• Inside Diameter: 1 24/32 inches *
• Weight (Including barrel nut, screws and shims): 10.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Includes:

• 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Blue KEYMOD Free Float Handguard Grip
• 2 x 9 Slot Picatinny Rails & screws
• 2 x Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308 (choose from menu)
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Parts that match this color: BlueC

The post 15″ Inch .308 7.62 AR10 AR-10 Lightweight Law Police Blue KEYMOD Cyan HIGH PROFILE Free Float Handguard appeared first on Total War Tactical.

Get ready to rock and roll with this latch that allows for fast and smooth operation under extreme tactical conditions. Replaces the existing latch on your AR charging handle. Includes spring and roll pin.

Latch only – charge assembly not included.

Features

• Steel Construction
• Oversized Latch for easy operation
• Smooth Operation under Extreme Conditions
• Battle Hammer Design
• Black Oxide Finish
• Fits: AR-15, AR15, .300 BLK, AR10, 308, 7.62 and compatible charging handles

The post AR15 AR AR-15 AR10 AR-10 Steel Battle Hammer Extended Charging Oversized Latch Only appeared first on Total War Tactical.

Whether you are left or right handed, this ambidextrous latch allows for fast and smooth operation under extreme tactical conditions. Replaces the existing latch on your AR charging handle. Includes spring and roll pin.

Latch only – charge assembly not included.

Features

• Steel construction
• Oversized Latch for easy operation
• Smooth Operation under Extreme Conditions
• Black Oxide Finish
• Fits: AR-15, AR15, .300 BLK, AR10, 7.62, .308 and compatible charging handles

The post AR15 AR AR-15 AR10 AR-10 Steel AMBI Ambidextrous Extended Charging Oversized Latch Only appeared first on Total War Tactical.

Show your support and bedazzle your AR15, AR Rifle with this Battle Hammer Charging Handle in Anodized Blue. Featuring an oversized left latch that allows for fast and smooth operation under extreme tactical conditions.

Note: This item does not match our Blue handguards. It is more ‘blue’ than the anodized color on our handguards. It matches better with our gas blocks, buffer tubes and other items

Features

• Mil-Spec standard
• Manufactured of 6061-T6 Aircraft Aluminum
• Oversized Latch for easy operation
• Battle Hammer Style
• Smooth Operation under Extreme Conditions
• Anodized Blue Finish
• Fits: AR-15, AR15, .300 BLK and compatibles

The post AR15 AR AR-15 Battle Hammer Charging Handle w/ Oversized Latch – Police Law Enforcement Blue appeared first on Total War Tactical.

Show your Police support with this AR Charging Handle, Forward Assist and Ejection Port Cover. Compatible with many .223 / 5.56 / .300 upper receiver systems,  it is Blue anodized to amaze all onlookers. Featuring a BAT Style, oversized charging handle, it is ready to rock and roll in no time! All parts manufactured to Milspec standards to ensure smooth operation under extreme tactical situations.

AR BAT Style Charging Handle

• Manufactured to mil-spec standards
• 6061-T6 Aircraft Aluminum
• Oversized large latch handle for easy operation
• Blue Anodized Finish

AR Dust Cover Complete Assembly

• Ejection Port Cover Door (Dust cover)
• Steel Spring
• Steel Rod
• C-Clamp
• Blue Anodized Finish

AR Forward Assist

• Plunger
• Spring
• Retainer Pin
• Blue Anodized Finish

Please Note: The blue anodizing on these parts do not match our Blue handguards.

The post AR15 AR-15 AR “BAT” Extended Charging Handle Forward Assist and Ejection Cover Door – BLUE LE Law Enforcement Police appeared first on Total War Tactical.