Properly index and position and protect your support hand using this Aluminum Cerakoted RED Keymod Key mod MLOK M-Lock M-LOK Handstop Barricade Stop Tactical Support Grip Rail. Install on your keymod or M-LOK handguard only! Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Raked front suitable for resting/stopping on a supported position, door frame, corner, wall etc.  It will also prevent your support hand from extending near or past the barrel end. Can also be used in the rear position to position tighter to the body. Made of a high quality 6061 aluminum that is impact and Cerakoted RED surface that is corrosion resistant. In addition, the aluminum body with polymer strap gives the operator the unique style with the feel of a classic polymer grip.  Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. 2 screws provide a stable, non-moveable/rotating attachment superior to single screw models.

Fits on Keymod or M-Lock systems only! Does not fit on picatinny rails!!

Features

• Fits on key mod and M-LOK handguards
• High quality 6061 aluminum CNC construction
• Cerakoted RED
• Hybrid design with polymer strap
• Raked front for barricade stop rest use
• Light weight
• Low profile, single piece design

Includes

• 1 x Aluminum Keymod M-LOK Handstop – Cerakoted RED
• 2 x Installation Screws
• 2 x Installation Nuts
• 1 x Installation Hex Tool

The post Aluminum Cerakoted GOP RED Keymod MLOK Handstop Barricade Hand Stop Tactical Support Grip appeared first on Total War Tactical.

Control recoil and properly index your support hand using this Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features long length to assist with positive control. Made of a high quality polymer and incorporates a integrated slots for mounting light switch pads on either side.  FDE / Desert Tan color. Inside the body is a screw on storage compartment perfect for batteries or tools. The compartment lid features an o-ring to help keep water out. There is also a spring inside to help put tension on the contents and keep them from rattling around.  Contoured design can be attached to thick or slim/thin style hand guards.

FDE Color Only! Pictures are for features presentation only!

Features

• Fits standard picatinny rails
• High quality Polymer construction
• Light switch panel mounts on both side
• Internal water resistant storage compartment with tension spring
• FDE / Desert Tan Color
• Weight: 5.5 0z

The post Handguard Picatinny Rail Polymer Vertical Handstop Grip w/ Storage Compartment + Switch Pad Mounts – FDE Flat Dark Earth Desert Tan appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Mini Micro Aluminum Anodized Keymod Key mod MLOK M-Lock M-LOK Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Made of a high quality 6061 anodized aluminum that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Keymod ready and with the special insert, it can mount to MLOK systems as well!

Fits on Keymod or M-Lock systems only! Does not fit on picatinny rails!!

Features

• Fits on key mod and M-LOK handguards
• High quality 6061 aluminum CNC construction
• Anodized Red Finish
• Light weight at ~ 0.50 oz
• Low profile, single piece design

Includes

• Aluminum Keymod M-LOK Handstop
• MLOK Insert
• Installation Screws
• Installation Nuts (Keymod & MLOK)
• Installation Tool

The post Aluminum Anodized Keymod or MLOK MINI Micro Handstop Hand Stop – GOP Red appeared first on Total War Tactical.

Properly index, position and protect your support hand using this Polymer MLOK Hand stop Barricade Stop Tactical Support Grip Rail Cover Panel. Can be used in the regular position when using the C-Clamp (Thumb over Bore) support technique.  Can also be mounted in reverse – allowing for resting/stopping on a supported position, door frame, corner, wall etc. It will also help prevent your hand from extending near or past the barrel end. Ultra light at 0.6 oz, making it one of the lightest handstops out there. Made of a high quality polymer plastic that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. 2 screws provide a stable, non-moveable/rotating attachment superior to single screw models.

Fits on MLOK systems only! Does not fit keymod key mod or on picatinny rails!!

Features

• Fits on MLOK handguards
• Enhanced angled grip for comfort
• High quality plastic polymer construction
• Reversible for barricade stop rest use
• Light weight at 0.6 oz
• Reversible, low profile, single piece design

Includes

• 1 x Polymer MLOK Handstop
• 2 x Installation Screws
• 2 x Installation Nuts

The post Polymer MLOK Handguard Rail Angled Handstop Forward Grip Barricade Stop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this micro Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features short length to help avoid snagging on equipment. Made of a high quality polymer, it features a hollow handle, making it one of the lightest grips. There are no storage options as the handle does not have a cover! Textured stipple design allows for positive control in dynamic situations. Low Profile contoured design can be attached to thick or slim/thin style hand guards.

Fits on MLOK systems only! Does not fit on picatinny or Keymod Key Mod rails!!

Features

• Fits MLOK handguards
• Polymer construction
• Black finish
• Textured stippled surface
• Weight: 1.2 oz
• Low profile design

The post 3″ inch MLOK Handguard Rail POLYMER Mini Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features long length to assist with positive control. Made of a high quality 6061 aluminum. Black anodized finish. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Note: there is no storage area in this model.

Fits on Keymod systems only! Does not fit on picatinny or MLOK M-LOCK rails!!

Features

• Fits Keymod handguards
• High quality 6061 aluminum
• Black anodized finish
• Weight: 5.3z
• Low profile design

The post 4″ inch Keymod Key Mod Handguard Rail Aluminum Mini Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features short length to help avoid snagging on equipment. Made of a high quality 6061 aluminum. Black anodized finish. Low Profile contoured design can be attached to thick or slim/thin style hand guards.

Fits on Keymod systems only! Does not fit on picatinny or MLOK M-LOCK rails!!

Features

• Fits Keymod handguards
• High quality 6061 aluminum
• Black anodized finish
• Weight: 2.7 oz
• Low profile design

The post 2″ inch Keymod Key Mod Handguard Rail Aluminum Mini Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features long length to assist with positive control. Made of a high quality 6061 aluminum. Black anodized finish. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Note: there is no storage area in this model.

Fits on MLOK systems only! Does not fit on picatinny or keymod key mod rails!!

Features

• Fits MLOK handguards
• High quality 6061 aluminum
• Black anodized finish
• Weight: 5.3 oz
• Low profile design

The post 4″ inch MLOK M-LOCK Handguard Rail Aluminum Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Control recoil and properly index your support hand using this Vertical Support Grip Rail. As a hand stop, it can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features short length to help avoid snagging on equipment. Made of a high quality 6061 aluminum. Black anodized finish. Low Profile contoured design can be attached to thick or slim/thin style hand guards.

Fits on MLOK systems only! Does not fit on picatinny or keymod key mod rails!!

Features

• Fits MLOK handguards
• High quality 6061 aluminum
• Black anodized finish
• Weight: 2.7 oz
• Low profile design

The post 2″ inch MLOK M-LOCK Handguard Rail Aluminum Mini Vertical Foregrip Grip Hand Stop Handstop appeared first on Total War Tactical.

Properly index and position and protect your support hand using this Polymer MLOK M-Lock M-LOK Handstop Stop Tactical Support Grip Rail. Can be used in the forward position when using the C-Clamp (Thumb over Bore) support technique. Can also be used in the rear position to position tighter to the body. Features front and back serrations for positive grip. Made of a high quality heat resistant polymer that is impact and corrosion resistant. Single piece unit makes for an easier installation compared to multi panel units. Low Profile contoured design can be attached to thick or slim/thin style hand guards. Ceracoat finish for the best in elemental protection. Proudly made in the USA.

Fits on M-Lock systems only! Does not fit on picatinny or keymod key mod rails!!

Features

• Fits M-LOK handguards
• High quality polymer construction
• Cerkote FDE Finish
• Light weight
• Length: 1 9/16″ inch
• Height: 1 3/8″ inch
• Low profile, single piece design
• Made in the U.S.A.

The post Polymer MLOK M-LOCK MINI Micro Handguard Rail Handstop Hand Stop Grip – Cerakote FDE appeared first on Total War Tactical.