Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 9.8 oz!!) and show off to your fellow elite shooters with this tactical 10″ Inch free float handguard  system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches HIGH profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Flat matte paint and baked finish
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.8 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ AR10 Free Float Handguard
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 HIGH PROFILE MLOK MLOCK Free Float Handguard Rail – FDE Flat Dark Earth Desert Tan Sand appeared first on Total War Tactical.

Lower your AR rifle, SBR or Pistol weight with this lightweight (only 7.3oz!) adjustable stock. Nylon polymer construction can withstand the most extreme and dynamic tactical situations. Fits on a mil-spec (NOT  COMMERCIAL) receiver carbine multi-position extension buffer tube. The stock has several smooth angular cutouts adding to the minimalistic design. The latch mechanism is easy to manipulate to provide that perfect length of pull for consistent shots and comfort. Features 1 sling strap slot and a metal dual sided ambidextrous QD Quick Disconnect female slot. Includes one 1.5 inch QD male sling swivel connect mount.

Features:

• Nylon polymer construction
• Fits mil spec buffer tubes only!
• Push button latch mechanism
• 1 Sling slot
• 1 double sided QD metal female slots
• Weight: 7.3 oz

Includes:

• 1 x Nylon Polymer Butt Stock
• 1 x 1.5″ Male QD Sling Swivel Connect

The post AR15 AR10 Lightweight Nylon Polymer Carbine Adjustable QD Butt Stock appeared first on Total War Tactical.

Lower your AR rifle, SBR or Pistol weight with this lightweight adjustable stock. Nylon polymer construction can withstand the most extreme and dynamic tactical situations. Fits on either mil-spec or commercial (though commercial has less wobble) receiver carbine multi-position extension buffer tube. The stock has several smooth cutouts adding to the minimalistic skeleton design. The latch mechanism is easy to manipulate to provide that perfect length of pull for consistent shots and comfort. Features 3 sling strap slots and a metal dual sided ambidextrous QD Quick Disconnect female slot. Includes one 1.5 inch QD male sling swivel connect mount.

Features:

• Nylon polymer construction
• Fits commercial or mil spec buffer tubes (commercial is a tighter fit)
• Push button latch mechanism
• 3 Sling slots
• 1 double sided QD metal female slots
• Weight: 8.5 oz

Includes:

• 1 x Nylon Polymer Butt Stock
• 1 x 1.5″ Male QD Sling Swivel Connect

The post AR15 AR10 Lightweight Nylon Polymer Skeleton Minimalist Carbine Adjustable QD Butt Stock appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.1 oz!!) and show off to your fellow elite shooters with this Tactical Ultra Light Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or Keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches Low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW PROFILE uppers
• One Piece Free Float Low Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Wall Width: 0.10 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.1 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black Keymod Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 Low Profile Keymod Free Float Handguard Rail – FDE Flat Dark Earth Desert Tan Sand appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 10.1 oz!!) and show off to your fellow elite shooters with this tactical 10″ Inch free float handguard  system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Flat matte paint and baked finish
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.1 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ AR10 Free Float Handguard
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 LOW PROFILE FDE Flat Dark Earth Desert Tan Sand MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 11.25 oz!!) and show off to your fellow elite shooters with this Tactical Ultra Light Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or Keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches Low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW PROFILE uppers
• One Piece Free Float Low Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 or LR-308
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Wall Width: 0.10 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black Keymod Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ AR10 FDE Flat Dark Earth Tan Low Profile Keymod Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your AR15 setup and show off to your fellow shooters with this ultralight system. The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. It is sure to amaze your friends! Free floating forerail design helps with accuracy while aggressive skeletal HEX CNC cuts feature an ultra light weight design. This is a single piece foregrip that is a slim diameter, with a slanted, angled end. Because of this, no end cap can be installed. M-Lock design allows for rail or m-lok accessories to be placed at the 3/6/9 o-clock positions. In addition, there are top placed, fixed picatinny rails are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility. Great for attaching hand stops, handguards, picatinny rails or light switch panels!  Handguard is friction fitted on to the barrel nut and is held in place by 2 hex screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Fits on any 223 556 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality 6061 T6 Aluminum Construction
• Flat top Picatinny Rail with M-Lok slots in between, extended for monolithic look
• M-Lock CNC cuts allow for various installation preferences
• Lightweight Steel Barrel Nut
• Length: 7.25 inches top,  ~6.5 inches bottom
• Outside Width: 1.54 inches
• Outside Height (Including top rail): 1.98 inches
• Inside Diameter: 1.37 inches
• Ultra Light Weight (Including barrel nut, main screws): 7.75 oz
• Clamp Style Barrel Nut System
• Allen nut clamp separator for easy barrel nut installation

Includes:

• 1 x 7″ AR AR15 Slim Hybrid Split Top Slanted M-LOK MLOK Free Float Handguard
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws (1 small)
• 2 x Barrel Nut Screw Allen Hex Wrench
• 1 x Gas Rod Spacer

The post 7″ AR AR15 Slim Clamp Hybrid Split Top Slanted FDE Dark Earth M-LOK MLOK Free Float Handguard appeared first on Total War Tactical.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (about 13 5/8 oz!!) and show off to your fellow elite shooters with this Tactical 15″ Inch Ultra Light Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy.

This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels!

Unique universal aluminum barrel nut is double sided with 16TPI threads on one side (side where circular line groove is) and 18TPI threads on the other! Complete compatibility with your DPMS LR308 or AR10 ARMALITE threaded uppers!

Clamp style, friction fitted to the handguard by 2 main allen screws. Also has a hex screw that opens and separates the clamp to fit on/off the barrel nut easier. Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Universal aluminum Barrel Nut – 18TPI AR10 ARMALITE *and* 16TPI DPMS LR-308 threads!
• Length: 15.0 inches
• Outside Width: 2.0 inches
• Outside Height (Including top rail): 2.21 inches
• Inside Diameter: 1.81 inches
• Weight (Including barrel nut, screws and shims): 13 5/8 oz
• Dual Barrel Nut Screws  in in a clamp style design for a Tight and Precise Fit
• Allen screw clamp separator for easy installation onto barrel nut

Includes:

• 1 x 15 ” Inch .308 / 7.62 AR10 AR-10 Ultra Light Clamp MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Universal Barrel Nut
• 2 x Barrel Nut Bolts
• 1 x Barrel Nut Allen Screw
• 2 x Barrel Nut Bolt Allen Hex Wrench

End cap that fits this model:

The post 15″ AR10 FDE Flat Dark Earth Desert Tan Clamp Style LOW PROFILE MLOK Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your AR15 AR setup (only 7.75 oz!!) and show off to your buds with this FDE Flat Dark Earth 7″ Inch Ultra Light Slim MLOK Free Float Hand Guard Fore Rail Grip system. Cool FDE color is sure to amaze your friends! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating design helps with accuracy. This is a single piece, with no barrel cap. M-LOCK  design allows for rail or M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching optics, hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Steel barrel Nut
• Length: 7.0 inches
• Inside Diameter: 1.37 inches
• Outside Width: 1 17/32 Inches
• Outside Height (Including top rail): 2 inches
• Weight (Including barrel nut, screws and shims): 7.75 oz
• 2 Barrel Nut Screws Holes in 3 / 6 / 9 o’clock Positions for Tight and Precise Fit

Includes:

• 1 x 7″ Inch Lightweight Slim FDE Flat Dark Earth MLOK Free Float Hand Guard
• 4 x Regular Timing Shims
• 1 x Roll Pin
• 1 x Steel Barrel Nut
• 6 x Barrel Nut Screws
• 1 x Barrel Nut Screw Allen Hex Wrench

The post 7″ Inch AR15 AR9 AR Ultra Light Slim FDE Flat Dark Earth / Desert TAN MLOK M-LOK Free Float HandGuard appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 11.25 oz!!) and show off to your fellow elite shooters with this Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches high profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 11.25 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ AR10 FDE Flat Dark Earth Tan HIGH PROFILE MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.