Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 9.5 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches low profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

End Cap That Fits This Model

The post 10″ Inch .308 / 7.62 AR10 AR-10 LOW PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.1 oz!!) and show off to your fellow elite shooters with this Tactical Ultra Light Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or Keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches Low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW PROFILE uppers
• One Piece Free Float Low Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Wall Width: 0.10 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.1 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black Keymod Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 Low Profile Keymod Free Float Handguard Rail – FDE Flat Dark Earth Desert Tan Sand appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 10.1 oz!!) and show off to your fellow elite shooters with this tactical 10″ Inch free float handguard  system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Flat matte paint and baked finish
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.1 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ AR10 Free Float Handguard
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 LOW PROFILE FDE Flat Dark Earth Desert Tan Sand MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 11.25 oz!!) and show off to your fellow elite shooters with this Tactical Ultra Light Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or Keymod accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches Low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches LOW PROFILE uppers
• One Piece Free Float Low Quality Aluminum Construction
• Flat top, Picatinny Rail
• Keymod CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 or LR-308
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Wall Width: 0.10 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.5 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black Keymod Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ AR10 FDE Flat Dark Earth Tan Low Profile Keymod Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 11.25 oz!!) and show off to your fellow elite shooters with this Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches high profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 11.25 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ AR10 FDE Flat Dark Earth Tan HIGH PROFILE MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches hi profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches high profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.75 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ Inch .308 / 7.62 AR10 AR-10 HIGH PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches low profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.75 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

End Cap That Fits This Model

The post 12″ Inch .308 / 7.62 AR10 AR-10 LOW PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 13.75 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 17″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches low profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches low profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 18TPI or LR-308 16TPI
• Length: 17.0 inches
• Outside Width: 2 1/32 Inches *
• Outside Height (Including top rail): 2 7/32 inches *
• Inside Diameter: 1 24/32 inches *
• Weight (Including barrel nut, screws and shims): 13.75 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

*Measurement taken with a tape measure to best estimate. I do not have a micrometer.

Includes:

• 1 x 17″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 17″ Inch .308 / 7.62 AR10 AR-10 LOW PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.