Improve the aim of your follow up shots with this carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil. Features internal reciprocating weights that help increase momentum. Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: approx 4.9 oz
• Length: approx 3.24 inches
• Steel Body
• Internal Reciprocating Weights for Increased Momentum and Smoother Function
• Black finish
• Easy Drop-In installation with no tools required

The post AR15 AR AR-15 Collapsible Stock Heavy Buffer 4.9oz Carbine Length – Reciprocating Weights appeared first on Total War Tactical.

Improve the aim of your follow up shots with this carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil. Features internal reciprocating weights that help increase momentum. Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: approx 5.4 oz
• Length: approx 3.26 inches
• Steel Body
• Internal Reciprocating Weights for Increased Momentum and Smoother Function
• Black finish
• Easy Drop-In installation with no tools required

The post AR15 AR AR-15 Collapsible Stock Heavy Buffer 5.4oz Carbine Length – Reciprocating Weights appeared first on Total War Tactical.

Improve the aim of your follow up shots with this KAK standard carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil.Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: 3.0 oz
• Length: 3.25 inches
• Black finish
• Easy Drop-In installation with no tools required

The post KAK AR15 AR AR-15 Collapsible Stock Buffer 3.0oz Carbine Length appeared first on Total War Tactical.

Own a unique and admirable piece of equipment by acquiring this high quality, lightweight billet upper receiver. Constructed of USA made billet 7075 T6 aluminum, this exquisite item features a slick side profile that doesn’t have a forward assist. This and the low profile brass deflector keeps the cross section slim and helps prevent equipment snags. Unique CNC cut outs help lower weight and gives an aggressive look and the flat top picatinny tactical rail system is manufactured to mil-spec standards. Cerakoted in hot barbie pink, this is a non-anodized design features a flat matte surface finish for added durability and camouflage. Popular for female shooters as well and is sure to amaze your friends! It will surely make you the talk of the town at your next event. Fits on any standard AR-9 lower receiver (pins not included). Accepts many popular hand guards and barrel nuts. Made in the USA.

Note: Stripped upper receiver only – no internal or other parts included.

Features:

• USA Made Billet Aluminum 7075 T-6
• Slick Side No Forward Assist
• Low Profile Brass Deflector
• Cerakote Pink
• Flat-Top with Picatinny rails
• Mil-Spec specifications
• Made in the U.S.A.

The post AR9 9mm AR-9 Stripped Slick Side Enhanced Billet Upper Receiver AR – Cerakote Barbie Pink (Made in USA) appeared first on Total War Tactical.

Lighten your AR Pistol setup (5.4 oz) with this 4.5″ Inch Free Float Handguard Rail System. Short length is great for your pistol or SBR setup. Free Float design helps with accuracy. This is a single piece, and a barrel cap can not be installed. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! The aluminum construction, anodized design features a bare unfinished surface. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 9mm setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

This is a NON-Anodized, non-painted bare metal exterior and interior. Similar color to Brushed Aluminum, Stainless Steel & Silver it will surely make you the talk of the town at your next event. Great for showcases and trade shows too! Great for those who want to DYI your own coloring project without having to strip the finished layer. Suitable for anodizing, duracoat, clearcoat, cerakote, water dip, water film transfer and plain old fashioned paint ‘n bake. Match your desired color exactly! Tired of FDE shades? No problem! Wanna match that OD Green perfectly? You Can! How about odd finishes like Burnt Bronze, etc? The world is your oyster. Or leave it alone to match your bare lower!

Note: This product may contain some manufacturing/tool blemishes that are common to raw, unfinished surfaces! They are cosmetic in nature and can usually be buffed or bead blasted away. Or it may be covered up with the finish of your choice!

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Bare Unfinished
• Steel Barrel Nut
• Length: 4.5 inches (Rear to Forward Point of D-End)
• Top Rail Length: 4.25 Inches
• Outside Height (Including top rail): 2.03 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no attachments or rails): 5.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made in the U.S.A.

Includes:

• 1 x 4.5″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 4.5″ Inch AR15 AR9 Pistol Clamp MLOK Free Float Handguard Rail Grip D-End – BARE appeared first on Total War Tactical.

Lighten your AR Pistol setup (5.4 oz) with this 4.5″ Inch Free Float Handguard Rail System. Short length is great for your pistol or SBR setup. Free Float design helps with accuracy. This is a single piece, and a barrel cap can not be installed. Aggressive CNC machined design allows for attachments to be placed  at the 3/6/9 o-clock positions. Great for attaching hand stops or light switch panels! The aluminum construction, anodized design features a flat matte surface for added durability and camouflage. Clamp style handguard is friction fitted  on to a steel barrel nut and is held in place by 3 hex screws. Fits on any 223 556 9mm setup with a mil-spec barrel mount, including airsoft, BB and pellet systems. Made in the USA.

Requires micro low profile gas block! (Not included)

Features:

• One Piece Free Float High Quality T6 Aluminum Construction
• Flat Top Picatinny Rail
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• Anodized Black Finish
• Steel Barrel Nut
• Length: 4.5 inches (Rear to Forward Point of D-End)
• Top Rail Length: 4.25 Inches
• Outside Height (Including top rail): 2.03 Inches
• Outside Width: 1.59 Inches
• Inside Width: 1.39 Inches
• Wall thickness: 0.09 Inches
• Weight (Including barrel nut but no attachments or rails): 5.4 oz
• Three Barrel Nut Screw Holes for a Tight and Precise Fit
• Proudly Made in the U.S.A.

Includes:

• 1 x 4.5″ Inch Handguard Rail System
• 1 x Steel Barrel Nut
• 3 x Barrel Nut Screws

The post 4.5″ Inch AR15 AR9 Pistol Clamp MLOK Free Float Handguard Rail Grip D-End appeared first on Total War Tactical.

Improve the aim of your follow up shots with this carbine length buffer. Heavier weight allows for a greater transfer of recoil energy to the buffer, effectively reducing felt recoil. Features internal reciprocating weights that help increase momentum. Drops in and replaces your existing buffer weight. No tools required!

Features:

• Fits AR15 and compatibles
• Weight: 3.0 oz
• Length: 3.25 inches
• Internal Reciprocating Weights for Increased Momentum and Smoother Function
• Black finish
• Easy Drop-In installation with no tools required

The post AR15 AR AR-15 Collapsible Stock Buffer 3.0oz Carbine Length – Reciprocating Weights appeared first on Total War Tactical.

Note: This is neither mil spec diameter or commercial diameter.

Complete your AR Pistol or SBR with this Pistol Buffer Tube Assembly kit includes all the parts needed for the back end of rifle project. It includes a buffer tube, spring, carbine buffer, end plate, castle nut and buffer tube foam pad. The Buffer tube is lightweight, durable, weather-resistant and is made of 6061 T6 aluminum and a cerakoted FDE finish.

Includes:

• Pistol Buffer Tube ~7 5/16″ inches long
• 1.24″ inch diameter
• Castle Nut
• End Plate
• Carbine Steel Spring
• Collapsible Stock Buffer -3.0 OZ-Carbine Length (BLACK)
• Pistol Stock Buffer Tube Foam Pad Cover – Short
• Cerakoted FDE

The post AR15 AR AR-15 Pistol Buffer Tube Brace Kit Cerakote FDE Flat Dark Earth – Tube, Spring, Weight, End Plate, Castle Nut & Foam Pad appeared first on Total War Tactical.

Own a unique and admirable piece of equipment by acquiring this high quality, lightweight billet upper receiver. Constructed of USA made billet 7075 T6 aluminum, this exquisite item features a slick side profile that doesn’t have a forward assist. This and the low profile brass deflector keeps the cross section slim and helps prevent equipment snags. Unique CNC cut outs help lower weight and gives an aggressive look and the flat top picatinny tactical rail system is manufactured to mil-spec standards. Cerakoted in FDE Flat Dark Earth, this is a non-anodized design features a flat matte surface finish for added durability and camouflage. Fits on any standard AR-9 lower receiver (pins not included). Accepts many popular hand guards and barrel nuts. Made in the USA.

Note: Stripped upper receiver only – no internal or other parts included.

Features:

• USA Made Billet Aluminum 7075 T-6
• Slick Side No Forward Assist
• Low Profile Brass Deflector
• Cerakote FDE
• Flat-Top with Picatinny rails
• Mil-Spec specifications
• Made in the U.S.A.

The post AR9 9mm AR-9 Stripped Slick Side Enhanced Billet Upper Receiver AR – Cerakote FDE Flat Dark Earth (Made in USA) appeared first on Total War Tactical.

AR15 AR Bench Vise Block for Upper and Lower Receiver Frames

Secure your AR15 upper and lower receiver properly and securely using this bench vice block tools. The 2 piece block holds the upper receiver in place while the single mag block is for the lower receiver (inserts into mag well). The vise blocks is designed to clamp your standard upper and lower receiver into a vise firmly to prevent marring, distorting or crushing your upper during assembly or maintenance. Also allows for some hands free installation of parts as well. This tool is a great addition to any toolbox and DIY enthusiast.  Constructed of lightweight, heavy-duty glass-filled polymer.

The post AR15 AR Bench Vise Block for Upper and Lower Receiver Frames appeared first on Total War Tactical.