Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 SBR Rifle setup (only 9.8 oz!!) and show off to your fellow elite shooters with this tactical 10″ Inch free float handguard  system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches HIGH profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Flat matte paint and baked finish
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.8 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ AR10 Free Float Handguard
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ AR10 HIGH PROFILE MLOK MLOCK Free Float Handguard Rail – FDE Flat Dark Earth Desert Tan Sand appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 9.6 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 10″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches hi profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches high profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 10.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 9.6 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 10″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 10″ Inch .308 / 7.62 AR10 AR-10 HIGH PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 11.25 oz!!) and show off to your fellow elite shooters with this Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches high profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 11.25 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ AR10 FDE Flat Dark Earth Tan HIGH PROFILE MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 12.75 oz!!) and show off to your fellow elite shooters with this Tactical 15″ Inch Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches hi profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 15.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.33 inches
• Inside Diameter: 1.85 inches
• Weight (Including barrel nut, screws and shims): 13.0 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End cap for this model:

The post 15″ AR10 FDE Flat Dark Earth Tan HIGH PROFILE MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 12.75 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 15″ Inch Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches HIGH PROFILE uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut – AR-10 or LR-308
• Length: 15.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.33 inches
• Inside Diameter: 1.85 inches
• Weight (Including barrel nut, screws and shims): 12.75 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 15″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut – AR-10 or LR-308
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End cap for this model:

The post 15″ Inch AR10 AR-10 HIGH PROFILE MLOK MLOCK Black Free Float Handguard Rail appeared first on Total War Tactical.

Choose AR-10 (18 TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (only 10.5 oz!!) and show off to your fellow elite shooters with this Black Anodized Tactical 12″ Inch Ultra Light MLOK MLOCK M-LOK M-LOCK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction features an anodized surface for added durability and smoothness. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOK M-LOCK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches hi profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• Matches high profile uppers
• One Piece Free Float High Quality Aluminum Construction
• Flat top, Picatinny Rail
• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 12.0 inches
• Outside Width: 2.06 Inches
• Outside Height (Including top rail): 2.29 inches
• Inside Diameter: 1.87 inches
• Weight (Including barrel nut, screws and shims): 10.75 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 12″ Inch .308 / 7.62 AR10 AR-10 Ultra Light Black MLOK  Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

End Cap That Fits This Model

The post 12″ Inch .308 / 7.62 AR10 AR-10 HIGH PROFILE Black MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Replace your damaged barrel nut or use this to properly fit your custom AR10 handguard. Steel construction with 16tpi thread pattern. Fits most modern AR-10 upper receivers that are threaded for 16tpi. Fits any clamping handguard with an inner diameter of 1.50 inches.

Features:

• 16TPI Threaded fits LR-308 DPMS Compatible AR10 Uppers (.308, 7.62, 6.5 Creedmoor, etc)
• Outside Diameter: 1.55 inches
• Length: 1.77 inches
• Weight: 4.2 oz
• AR15 or AR10 standard armorers wrench needed to install

Installation tools (either will work):

The post AR10 LR308 DPMS 16TPI 1.55″ OD Steel Barrel Nut for AR-10 .308 Keymod Key Mod M-LOK MLOK Clamp Handguards appeared first on Total War Tactical.

Replace your damaged barrel nut or use this to properly fit your custom AR10 handguard. Steel construction with 16tpi thread pattern. Fits most modern AR-10 upper receivers that are threaded for 16tpi. Fits any clamping handguard with an inner diameter of 1.50 inches.

Features:

• 16TPI Threaded fits LR-308 DPMS Compatible AR10 Uppers (.308, 7.62, 6.5 Creedmoor, etc)
• Outside Diameter: 1.50 inches
• Length: 1.77 inches
• Weight: 3 3/8 oz
• AR15 or AR10 standard armorers wrench needed to install

Installation tools (either will work):

Compatible with these handguards (along with many others) :

The post AR10 LR308 DPMS 16TPI 1.50″ OD Steel Barrel Nut for AR-10 .308 Keymod Key Mod M-LOK MLOK Clamp Handguards appeared first on Total War Tactical.

Choose AR-10 (18TPI ARMALITE) or LR-308 (16TPI DPMS) Barrel Nut from drop down select menu.

Lighten your .308 / 7.62 AR10 AR-10 Rifle setup (14 3/4 oz!!) and show off to your fellow elite shooters with this Tactical Ultra Light MLOK MLOCK M-LOCK M-LOK Free Float HandGuard Fore Rail Grip system. It will surely make you the talk of the town at your next event. Great for showcases and trade shows too! The aluminum construction, non-anodized design features a flat matte, baked surface for added durability and camouflage. Free floating forerail design helps with accuracy. This is a single piece foregrip that is a non-slim diameter. It is also good for accommodating integral thermal sleeves, muzzle shrouds or suppressors. Pre-drilled at the end for your choice barrel caps, but there is no barrel cap included. Design allows for rail or MLOK MLOCK M-LOCK M-LOK accessories to be placed at the 3/6/9 o-clock positions. Great for attaching hand stops, handguards, picatinny rails or light switch panels! Comes with timing shims for that precise fit. Matches HIGH profile uppers and fits on any setup with a 308 / 762 mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires a low profile gas block! (Not included)

Features:

• • Matches HIGH PROFILE uppers
  • One Piece Free Float High Quality Aluminum Construction
  • Flat top, Picatinny Rail

• MLOK CNC cuts allow for various installation preferences
• Aluminum Barrel Nut
• Length: 17.0 inches
• Outside Width: 2.05 Inches
• Outside Height (Including top rail): 2.33 inches
• Inside Diameter: 1.86 inches
• Weight (Including barrel nut, screws and shims): 14 3/4 oz
• Single Barrel Nut Screw Hole in 6 o’clock Position for Tight and Precise Fit
• Barrel Nut Sleeve helps lock hand guard into place

Includes:

• 1 x 17″ Inch .308 / 7.62 AR10 AR-10 Ultra Light FDE MLOK MLOCK M-LOCK M-LOK Free Float Handguard Grip
• Timing Shims
• 1 x Aluminum Barrel Nut
• 1 x Barrel Nut Sleeve
• 1 x Barrel Nut Bolt
• 1 x Barrel Nut Bolt Allen Hex Wrench

Uses this tool to install:

Endcap for this handguard

The post 17″ AR10 FDE Flat Dark Earth Desert Tan HIGH PROFILE MLOK MLOCK Free Float Handguard Rail appeared first on Total War Tactical.

Lighten your precision .308 7.62 setup (about 1 lbs 7/8 oz ) with this 19″ Inch .308 7.62 308 handguard system. Heavy Duty and Free Float design helps with accuracy. Extra long full length rail is a single piece design slanted front which can not accommodate an end cap. USA Made Aggressive CNC machined MLOK design allows for attachments to be placed  at the 3/6/9 o-clock positions. On top, there are fixed picatinny rails which are located at the beginning and end of the handguard. In between are M Lock slots. This saves weight while allowing flexibility.  Great for attaching more rails, hand stops, sling mounts, light switch panels and any other MLOK compatible accessories! Mil-spec Hard Coat Anodized Black Type III finish. QD quick disconnect mount holes at the front and rear, on both sides. However the rear holes require a short QD push button sling mount, as the barrel nut may prevent full seating. The handguard is friction fitted, clamped on to a DPMS Compatible LR-308 16tpi steel barrel nut and is held in place by hex screws. The screws have individual nuts so there is no stripping the threads! Fits on any 308 762 setup with a mil-spec barrel mount, including airsoft, BB and pellet systems.

Requires micro low profile gas block! (Not included)

Features:

• Fits HIGH PROFILE uppers
• One Piece Free Float High Quality T6 6061 Aluminum Billet Construction
• Hybrid Design with Flat Top Picatinny Rails At Beginning and End
• MLOK M-LOK CNC Cuts Allow Full Spectrum Installation
• 4 QD Quick Disconnect Push Button Sling Mount Points
• DPMS Compatible LR-308 Steel Barrel Nut 16TPI
• Hard Coat Anodized Black Type III Finish
• Longest Length: 19.0  inches
• Outside Widest Width: 2.27 inches
• Inside Widest Width (MLOK Slots area) : 1.71 inches
• Inside Width: 1.53 inches
• Outside Height (Including top rail): 2.46 inches
• Wall Thickness: 0.9 inches
• Weight (Including barrel and screws only): about 1 lbs 7/8 oz
• 2 Barrel Nut Screw Holes for a Tight and Precise Fit

Includes:

• 1 x 19″ AR10 Handguard
• 2 x Barrel Nut Screws/nuts
• 1 x Barrel Nut

The post 19″ AR10 High Profile Slanted HYBRID MLOK M-LOK Free Float DPMS Handguard WITHOUT Top Rail appeared first on Total War Tactical.